2507 Mini-flow sensor
The +GF+ SIGNET 2507 Mini-Flow Sensor is ideal for precision low flow monitoring of corrosive chemicals or high purity fluids. A quick half turn allows access to the internals without exposing the electronics. The sensor can be inspected and cleaned in seconds, and ready for service again. The 2507 is available in four configurations, covering a wide range of flow rates.
Ordering Information
Mfr. Part No. Code Description
3-2507.100-2V 198 801 732 Mini-Flow Sensor, 2mm insert
3-2507.100-3V 198 801 733 Mini-Flow Sensor, 3mm insert
3-2507.100-4V 198 801 734 Mini-Flow Sensor, 4mm insert
- 3-2507.100-6V 159 000 264 Mini-Flow Sensor, 6mm inlet, no insert
Features
- Corrosion resistant plastic
- PVDF for ultrapure water
- Easy installation and maintenance
Applications
- Chemical addition
- Dispensing systems
- Laboratory and clinical wet benches
Compatibility
- 5500 Flow Monitor
- 8550 Flow Transmitter
- 5600 Batch Controller
- 8900 Flow Controller
- 5075 Flow Monitor
Technical Data
Output Signal: | Open collector transistor, 10mA max sink |
Operating Range: | Refer to ordering information |
Pressure/Temperature: | 80 psi @ -22 degrees F 45 psi @ 248 degrees F |
Power Requirements: | 4.5 to 24 VDC @ 13 mA max. |
Pipe Connections: | 0.25 in. NPT (male) |
Repeatability: | +/-0.25% of full range |
Materials: | Sensor body: PVDF Insert: PTFE Turbine: PVDF O-ring: Vitonå¨ Threaded adapters: PVDF |
Flow Monitor
- 8900 Flow Controller
Accessories
Mfr. Part No. Code Description
3-2507.080-2 159 000 254 Rotor, 2507
3-2507.080-3 159 000 255 Quad Ring, 2507
3-2507.080-5 159 000 256 DIN Connector, 2507
3-2507.081-2 198 801 502 2 mm Insert
3-2507.081-3 198 801 503 3 mm Insert
3-2507.081-4 198 801 558 4 mm Insert
- 5523-0222 159 000 392 Cable, per foot