Clamp multimeter CMP-2000

Universal clamp-meter / multimeter.

The CMP-2000 is ruggedly constructed, and egonomically designed for technicians and engineers to use comfortably for long periods.

A variety of functions are all at your fingertips in a hand-held device.

Measures current up to 2,000 A; the large jaw is 2.4 ins diameter, and it can clamp around bus bars 2.75 x 0.7 ins.

Safety First!

CAT IV 600 V measurement category.

The instrument has an electronic overload protection of all functions and ranges.

Features:

• AC current measurement (TRUE RMS) up to 1,500 Amps and DC up to 2,000 Amps.
• Measurement of INRUSH current for start-up of electrical motors or equipment.
• AC voltage measurement (TRUE RMS) up to 750 VAC and DC up to 1,000 VDC.
• Resistance measurement for resistances below 30 Ω
• Continuity test with audio.
• Capacitance measurement.
• Temperature measurement (Fahrenheit or Celsius).
• Frequency measurement.
• Duty cycle measurement.
• Diode test.

AC current measurement (TRUE RMS) up to 1,500 A and DC up to 2,000 A.

Measurement of INRUSH current in start-up phase of electrical device.

AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1,000 V.

Resistance measurement and continuity test:

• continuity test with acoustic signalling (beeper) for resistance below 30 Ω.

Capacitance measurement

Temperature measurement (Fahrenheit or Celsius).

Frequency measurement.

Duty cycle measurement.

Diode test.

Additionally:

• safe, insulated measuring clamp,
• autoranging,
• „DATA HOLD” function, for holding measured values,
• backlit LCD,
• „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,
• „MAX/MIN” function,
• over range indication,
• „AUTO-OFF” function after 30 min.

Electric security:

• measurement category: CAT IV 600 V acc. to EN 61010 – 1,
• protection class acc. to EN 60529: IP20,

Other technical data:

• power supply, 9 V battery type 6LR61,
• display: 6,600 counts, backlit LCD,
• continuity test: threshold 30 Ω,
• diode test: test current of 0.8 mA , typical open circuit voltage 3.2 V DC, typical,
• low battery indication: BAT displayed,
• over range indication: ‘OL’ displayed,
• temperature sensor: type K thermocouple,
• input impedance: ca.10 MΩ (V DC and V AC),
• AC bandwidth: 50 to 500 Hz,
• auto power OFF: 30 minutes,
• dimensions: 11″ x 4.25″ x 2.09″ / 281 x 108 x 53 mm,
• weight: 1.26 lbs / 570 g (with battery),
• accordance with following standards: EN 61010 – 1, EN 61010 – 2-032.

Rated operational conditions:

• able to open the clamp: Ø 2.25″ / 57 mm wire; 2.75″ x 0.7″ / 70 x 18 mm bus bar,
• operating temperature: 32F to 122F / 0 to +50 °C,
• storage temperature: -4F to 140F / -20 to +60 °C,
• operating altitude: max 6,562 ft / 2,000 m.

DC current measurement

AC current measurement (TRUE RMS)

DC voltage measurement

AC voltage measurement (true RMS)

Resistance measurement

Capacitance measurement

Frequency measurement

Temperature measurement

Duty cycle measurement

„m.v.”- measured value