CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.
Combining clean design, small size and lowcost with enough accuracy for all but the most demanding applications ourMinihelic® II gage offers the latest in design features for a dial typedifferential pressure gage. It is our most compact gage but is easy to read andcan safely operate at total pressures up to 30 psig. The Minihelic® II gage isdesigned for panel mounting in a single 2-5/8" diameter hole. Standardpressure connections are barbed fittings for 3/16" I.D. tubing; optional1/8" male NPT connections are also available. Over-pressure protection isbuilt into the Minihelic® II gage by means of a blow-out membrane molded inconjunction with the diaphragm. Accidental over-ranging up to the rated totalpressure will not damage the gage. With removable lens and rear housing, thegage may be easily serviced at minimum cost.
With the housing molded from mineral and glassfilled nylon and the lens molded from acrylic, the gage will withstand rough useand exposure as well as high total pressure. The 5% accuracy and low cost of theMinihelic® II gage make it well-suited for a wide variety of OEM and userapplications. OEM applications include cabinet air purging, medical respiratorytherapy equipment, air samplers, laminar flow hoods, and electronic air coolingsystems. As an air filter gage, the Minihelic® II gage finds many end useapplications on large stationary engines, compressors, ventilators, and airhandling units. The Minihelic® II gage is suitable for many of the sameapplications as the Magnehelic® gage where the greater accuracy, sensitivity,and higher and lower differential pressure ranges of the Magnehelic® gage arenot required
EXAMPLE | 2-5000-0 | AT | Series 2-5000-0-AT Minihelic® II Differential Pressure Gage, range 0-.5" w.c., with aluminum tag. |
RANGE | 2-5000-0 2-5001 2-5002 2-5003 2-5005 2-5010 2-5020 2-5040 2-5060 2-5080 2-5100 2-5205 2-5210 2-5215 2-5000-25MM 2-5000-50MM 2-5000-100MM 2-5000-125PA 2-5000-250PA 2-5000-500PA 2-5000-750PA 2-5000-1KPA 2-5000-3KPA 2-5000-5KPA | 0-.5" w.c. 0-1" w.c. 0-2" w.c. 0-3" w.c. 0-5" w.c. 0-10" w.c. 0-20" w.c. 0-40" w.c. 0-60" w.c. 0-80" w.c. 0-100" w.c. 0-5 psid 0-10 psid 0-15 psid 0-25 mm w.c. 0-50 mm w.c. 0-100 mm w.c. 0-125 Pa 0-250 Pa 0-500 Pa 0-750 Pa 0-1 kPa 0-3 kPa 0-5 kPa | |
OPTIONS | AT BB NIST NPT | Aluminum Tag Bottom Barb Connection NIST Certificate of Calibration NPT Connection |
Be the first to review “Differential pressure switch 16”