No products in the cart.
Product Details
The Fluke Calibration 653170M Electronic Deadweight Tester Kit, 7 to 70 MPa (1000 to 10000 psi) is at home in metrology and calibration labs, on the production floor, or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. High quality hardware allows for easy system fill and prime, pressure generation, and precise control. Premium performance is wrapped up into one, compact, lightweight, transportable package. An optional battery/charger pack supports up to eight hours of operation away from line power, and an optional shipping/carrying case with handles and wheels allows for easy transport during field application.
High Performance Calibration Made Simple
Fluke Calibration 6531-70M features E-DWT-H configurations, combined with the accessories needed for a complete calibration system. The 6531-70M options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10% to 100% of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. This kit provides all that you need to perform high level hydraulic pressure calibration, right out of the box.
Fluke 6531-70M Specifications
| Pressure Range | Up to 200 MPa (30k psi), depending on configuration |
| Operating Medium | Shipped dry, standard preparation. Can be filled with diethylhexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil. |
| Reservoir Capacity | 300cc (18″3) |
| Variable Volume Displacement | 3cc (0.18″3), 200 MPa (30,000 psi) maximum |
| Filling and Priming Pump Displacement | 3.7cc (0.23″3) |
| Power Requirements | To RPM4-E-DWT: 12V DC, 1.2A To AC to DC Power Supply: 100 to 240V AC, 50/60 Hz |
| Storage Temperature | -20 to 70 °C |
| Operating Temperature | 10 to 40 °C |
| Weight | 1 Q-RPT: Approx. 12 kg (26 lbs) 2 Q-RPT: Approx. 14 kg (30 lbs) |
| Dimensions | Footprint: 41.4 x 37.1cm (16.3 x 14.6″) Height: 26.9cm (10.6″), 33.6cm (13.2″) to max variable volume handle height |
Be the first to review “Fluke 6531-70M E DWT Electronic Deadweight Tester, 70 mPa, 10K PSI”