Fixeddepth electromagnetic insertion flow meters
|EX81P Fixed Depth Insertion Magmeter (PN# BM0000)|
PVC Insertion Magmeter, for 1″ to 4″ size.
|EX81S Fixed Depth Insertion Magmeter (PN# BM0050)|
Stainless Steel, for 1″ to 4″ size.
|EX82P Fixed Depth Insertion Magmeter (PN# BM0100)|
PVC Insertion Magmeter, for 6″ to 10″ size.
|EX82S Fixed Depth Insertion Magmeter (PN# BM0150)|
Stainless Steel, for 6″ to 10″ size.
|EX83S Fixed Depth Insertion Magmeter (PN# BM0800)|
Stainless Steel, for 12″ size.
|On this page:||Downloads (PDF):|
The EX81 is an insertionelectromagnetic flowmeter for use with conductive liquids in pipe sizes 1 to4. The EX82, Insertion Magmeter, is for use with pipe sizes 6 to10. The EX83, Insertion Magmeter, is a stainless steel electromagneticflowmeter designed for use with pipes 12 inches in diameter. With nomoving parts, the insertion electromagnetic flowmeter is highly suitable forcorrosive environments and for difficult applications such as those involvingchanging viscosities and pulsating flows. The insertion electromagneticflowmeter is particularly recommended for metering the output of air-drivendiaphragm pumps.
Designed for modularity and versatility, the EX80 series, insertionelectromagnetic flowmeters, have a current-sinking pulse output, which can becombined with the appropriate transmitter or indicator depending on theapplication. For 4-20mA analog output and display of rate and total, anFT420, pulse and 4-20mA output, can be used. For a 4-20mA analog outputonly, the AO55, blind 4-20mA converter, can be mounted directly onto the meter. If the EX80 series, Insertion Magmeter, is being used with a programmablecontroller, the output signal can be fed direct with no other conditioningrequired.
The EX80 series, insertion electromagnetic flowmeters, requires a specialfitting, since it is not depth-adjustable as are the EX100/200 series meters. Installation in the fitting ensures correct depth placement in the pipe. Fittings and sensors are available in PVC and stainless steel.
Accuracy: 1% of full scale
Output: Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec
Bi-Directional: Direction output, opto isolated
Empty Pipe Detection: Flow defaults to zero
Flow Range: 0.2 – 20 ft/sec (.06 – 6.09 m/sec)
Maximum Pipe Pressure: 200 PSI (13.8 bar)
PVC 130º F (55º C)
Stainless Steel 200º F (93º C)
Minimum Conductivity: 20 microsiemens/cm
Power: 12 – 24 Vdc, 250 mA minimum
Mechanical: 316 SS/PVC
Electrode plate: PVDF
Housing Cast: powder-coated aluminum
Size: 4″ square; 6-7″ total length (10.2 cm square; 15.2 to17.8 cm total length)
Weight: 2 lbs (907g)
|FT420M/FT420W Pulse & 4-20mA Output Display (PN# BM0200/BM0210)|
Requires 12-24VDC power. Specify meter (PN# BM0200) or wall (PN# BM0210) mounted. Note: Meter mounted displays include 18 feet of cable.
|AO55M/AO55W Blind 4-20ma Converter (PN# BM0250/BM0260)|
Requires 24-36VDC power. Specify meter (PN# BM0250) or wall (PN# BM0260) mounted. Note: Meter mounted converters include 18 feet of cable.