High Voltage Oscilloscope Probe
2000V max
10M ohm input impedance, 17.5pF Capacitance
100X Probe Ratio
15 to 35pF compensation range
Extech TL625 High Voltage Oscilloscope 2000-volt 100mHz Probe
The Extech TL625 is a 100 MHz high voltage oscilloscope probe for Extech® MS6000 series oscilloscopes. 100MHz High Voltage Oscilloscope Probe, 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.
Low Frequency Probe Compensation
Before taking any measurements using the probe, first check the compensation and adjust it to match the channel inputs. Most oscilloscopes have a square wave reference signal available at a terminal on the front panel used to compensate the probe. Connect the probe to the signal source to display a 1kHz test signal on the oscilloscope. Adjust the trimmer “L” until the signal displays a flat-top square wave.
Be the first to review “Extech TL625 High Voltage Oscilloscope 2000-volt 100mHz ProbeProbe”