GL6D10A Remote Controller
The Inspire 2 remote controller is a multi-function wireless communication device that integrates a dual frequency video downlink ystem and the aircraft remote control system. The 5.8 GHz video downlink is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances in open areas. The remote controller features a number of camera control functions, including photo/ video capture as well as gimbal control. The battery level is displayed via LED indicators on the front panel of the remote controller. When in dual remote controller mode, each of the two remote controllers separately control aircraft and camera and can be up to 328 feet (100m) apart.
Remote Controller Operations
Powering On And Off The Remote Controller
The Inspire 2 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh. The battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to power on your remote controller:
- When powered off, press the Power Button once and the Battery Level LEDs will display thecurrent battery level.
- Then, press and hold the Power Button to power on the remote controller.
- The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft. The Status LED will show a solid green light when linking is completed.
- Repeat step 2 to power off the remote controller after finish using it.
Specifications
General Specifications | |
Model | GL6D10A |
Operating Frequency | 2.400-2.483 GHz; 5.725-5.825 GHz |
Max Transmitting Distance | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
EIRP | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
Video Output Ports | USB, HDMI |
Power Supply | Built-in battery |
Charging | charger |
Dual User Capability | Host-and-Slave connection |
Mobile Device Holder | Tablet or Smart Phone |
Max Mobile Device Width | 170 mm |
Output Power | 9W (Without supplying power to smart device) |
Operating Temperature | -4° to 104° F (-20° to 40° C) |
Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C)< More than 3 months: 72° to 82° F (22° to 28° C) |
Charging Temperature | 32° to 104° F (0° to 40° C) |
battery | 6000 mAh 2S LiPo |
USB Supply power | iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max) |
Charger | |
Model | IN2C180 |
Voltage | 26.1 V |
Rated power | 180 W |
Battery (Standard) | |
Name | Intelligent Flight Battery |
Model | TB50-4280mAh-22.8V |
Capacity | 4280 mAh |
Voltage | 22.8 V |
Battery Type | 6S LiPo |
Energy | 97.58 Wh |
Net Weight | 515 g |
Operating Temperature | -4° to 104° F (-20° to 40° C) |
Storage Temperature | Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) |
Charging Temperature | 41° to 104° F (5° to 40° C) |
Max Charging power | 180 W |
Charging Hub (Model: IN2CH) | |
Input Voltage | 26.1 V |
Input Current | 6.9 A |
Downward Vision System | |
Velocity Range | <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m) |
Altitude Range | <32.8 feet (10 m) |
Operating Range | <32.8 feet (10 m) |
Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
Ultrasonic Sensor Operating Range | 0.33-16.4 feet (10-500 cm) |
Ultrasonic Sensor Operating Environment | Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
Forward Vision System | |
Obstacle Sensing Range | 2.3-98.4 feet (0.7-30 m) |
FOV | Horizontal: 60°; Vertical: 54° |
Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
Upward Infrared Sensing System | |
Obstacle Sensing Range | 0-16.4 feet (0-5 m) |
FOV | ±5° |
Operating Environment | Large, diffuse and reflective obstacles (reflectivity >10%) |