The FLIR TG165-NIST Spot Thermal Camera, NIST Certificate of Traceability, 50° x 38.6° FOV, -13 – 716°F Range, 9 Hz Framerate bridges the gap between single spot infrared thermometers and FLIR’s more sophisticated thermal imagers. Equipped with FLIR’s exclusive Lepton micro thermal sensor, the TG165-NIST lets you see the heat so that you know where to reliably measure it. Designed for general contracting, the TG165-NIST will help you Easily find unseen hot and cold spots for instant troubleshooting. Download and store images on the 8 GB Micro SD card that comes standard with the TG165-NIST camera.
NIST Certificate of Traceability
FLIR’s exclusive 12-Point Inspection and Calibration Program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST).
12-Point Inspection and Calibration Program:
- Perform a complete operational check
- Image calibration and camera alignment, when applicable
- Verify all internal cable and PCB connections
- Upgrade internal camera software to latest revisions
- Perform minor repairs
- Verify and/or calibrate IR image as needed each temperature range for image uniformity
- Verify ambient temperature compensation as needed
- Re-calibration to ensure it meets factory specification
- Perform quality approved acceptance test procedure
- Provide certificate of conformance
- Provide calibration certificate (optional, extended calibration certificate with measured values)
- Clean optics; viewfinder cleaned when applicable
- *Does not include parts or labor required to meet calibration standards, nor additional lens/filter calibrations.
Specifications:
IR Temperature Measurement | |
Basic Accuracy | +/- 1.5% or 37.4°F (1.5°C) |
Range | -13 – 716°F (-25 – 380°C) |
Emissivity | 4 Pre-Set Levels with Custom Adjustment, .1 – .99 |
Distance to Spot Ratio (D:S) | 24:1 |
Measurement Resolution | .1 °F/°C |
Response Time | 150 Milliseconds |
Spectral Response | 8-14 µm |
Lasers | Dual diverging lasers, frames temp measurement area |
Thermal Imaging | |
Imaging Detector | FLIR Lepton Microbolometer Focal Plane Array (FPA) |
Shutter | Integrated automatic shutter |
Image Resolution (H x W) | 4,800 pixels (80 x 60) |
Spectral Response | 8-14 µm |
Field of View (H x W) | 50° x 38.6° |
Upper Scene Range | 260°F (127°C), 400K |
Thermal Imaging Sensitivity | 150mK |
Frame Rate | 9 Hz |
Color Palettes | Grey scale, hot iron |
Saved Image Format | Bitmap (BMP) image with temperature and emissivity |
General Specifications | |
Unit Size (H x W x D) | 7.3 in. x 2.2 in. x 3.7 in. (186mm x 55mm x 94mm) |
Display Type | 2.0 in TFT LCD |
Display Resolution (W x H) | 38,720 pixels (176 x 220) |
Battery | Rechargeable via micro USB Lithium-ion battery: 3.7V, 2600mAh |
Auto Power Off | Yes, adjustable/disable |
Battery Life Hours | Typical use: Five 8-hr work days; continuous use: 8 hrs |
Certifications | CE/CB/FCC/FDA |
8 GB micro SD card | |
Operating Temperature | 14 – 113°F (-10 – 45°C) |
Drop Test | 6.5 ft. (2m) |
Tripod Mount | 1/4 in. – 20 on handle bottom |
Included:
- 1 – Spot Thermal Camera, 50° x 38.6° FOV, -13 – 716°F Range, 9 Hz Framerate
- 1 – NIST Certificate of Traceability
- 1 – Lanyard
- 1 – USB Cable
- 1 – International Charger (US, UK, EU, AU, CN)
- 1 – 8 Gb Micro SD Card
- 1 – Technical Documentation
Be the first to review “FLIR TG165 Spot Thermal Camera w/Image Storage”