Fluke 190-202-III 2-Channel Color ScopeMeter with DMM/External Input, 200 MHz

$5377.99

Product Features:

CAT III 1000 V/CAT IV 600 V rated portable oscilloscopes
Connect-and-View™ triggering automatically displays waveforms without having to adjust amplitude, timebase and trigger settings
Large, bright color display for easy in-the-field viewing and both USB and Wi-Fi data download options for analyzing data with FlukeView® software

Oscilloscope modes

Number of channels: Two (2)
Bandwidth: 200 MHz
Rise time: 1.7 ns
Number of scope inputs: 2 input channels plus external trigger
Channel architecture: All inputs fully insulated from each other and from ground; Inputs may be activated in any combination
Input coupling: AC or DC, with ground level indicator
Input sensitivity: With 10:1 probe, 20 mV to 1000 V/div; With 100:1 probe, 200 mV to 10 kV/div; Direct (1:1), 2 mV to 100 V/div
Bandwidth limiter: 20 MHz and 10 kHz
Polarity: Normal, Inverted, Variable
Vertical resolution: 8 bit
Accuracy at 4 s to 10 μs/div: 5 mV/div to 100 V/div, ±(1.5 % + 6 counts); 2 mV/div, ±(1.5 % + 10 counts)
Input impedance: 1 MΩ (± 1 %) // 15 pF (± 2.25 pF)
Horizontal
- Maximum realtime sample rate (sampled simultaneously): 2.5 GS/s (each channel)
- Record length: Up to 10,000 samples per channel
- Time base range: 2 ns/div to 4 s/div; Time base in a 1-2-4-sequence; Slower time/division settings using ScopeRecord™ Roll mode
- Maximum record length: 10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecord™ Roll mode
- Timing accuracy: ± (0.01 % of reading + 1 pixel)
- Glitch capture: 8 ns (10 μs/div to 2 min/div)
Display and acquisition
- Display: 133 mm x 90 mm (5.3 in x 3.5 in) full-color high brightness LCD
- Display modes: Any combination of channels; average on/off; replay
- Visible screen width: 12 divisions horizontally in scope mode
- Digital persistence modes: Off, short, medium, long, infinite and envelope mode
- Waveform mathematics: One (190-xx2) or two (190-x04) mathematical operations on 2 input channels (A and B, C and D): add, subtract, multiply; X-Y-mode; Frequency Spectrum using FFT
- Acquisition modes: Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture, waveform compare with automatic “Pass/Fail testing”; Replay
Trigger and delay
- Source: Input A, B or External (via meter input)

NORMAL DELIVERY 1-2 week
Call us to get the exact delivery date.
International Credit cards are not accepted on online orders.

SKU: FLUKE-190-202-III Category: Other Test Meters & Detectors

Brand:Fluke

Warranty: As per Manufacturer policy

100% Genuine Product

Brand Warranty

Easy and Secure Payment

Easy Returns

Buyer Protection

Payment Options:
Credit Card, Debit Card

Buy More, Save More.
Timely delivery with complete tracking

Description
Additional information
Specifications PDF
Reviews (0)
Catalog

The Fluke 190202III 2-Channel Color ScopeMeter with DMM/External Input, 200 MHz is engineered to go where the user goes, and tackles just about any troubleshooting job along the way. This CAT III 1000 V/CAT IV 600V rated test tool combines rugged portability with the high performance of a bench oscilloscope to help users take on the challenges of installing, commissioning and maintaining industrial machinery, automation and process controls, and power conversion electronics with ease.

Fast sampling rates, high resolution and deep memory allow high-accuracy capture and display of waveform details, noise, and other disturbances. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Features like TrendPlot™ Paperless Recorder, ScopeRecord™ Mode, Connect-and-View™ Triggering and a unique 100-screen Replay function help users quickly diagnose issues to minimize repair costs and downtime. These features make the 190-202-III oscilloscope easy to use, especially when diagnosing the most difficult problems like complex waveforms, induced noise, intermittent events, and signal fluctuations or drift.

Measure from mV to kV safely

Independently isolated inputs allow users to make measurements in mixed circuits with different ground references, which reduces the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. The 190-202-III test tool is engineered to cover a wide application range from mV to kV, so that users are ready for anything from microelectronics to heavyduty higher voltage electrical applications. The 190-202-III 200MHz configuration includes VPS410-II 10:1 probes suitable for both microelectronics and higher voltage applications.

IP-51 rated for harsh environments

Rugged and shock-proof, 190-202-III is built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time a user reaches for their 190-202-III, they can be confident that it will work reliably wherever the work takes them.

USB and Wi-Fi connectivity

The Fluke 190-202-III offers two USB ports, electrically isolated from measurement input circuits allowing users to quickly and easily transfer data to a PC, archive and share waveforms with OEMs, colleagues and support staff, or store waveforms, screen captures and instrument setups onto USB memory devices for later use. Easily transfer saved files via USB stick, direct connection via the USB interface or optional Wi-Fi connectivity (not included). These files can be used for further data handling or in FlukeView-2 Software to study waveforms in greater detail.

Connect-and-View

Connect-and-View triggering

Connect-and-View triggering provides an instant, stable display without the need for adjusting settings. Triggering can be difficult with other scopes. If settings are incorrect, results can be unstable or incorrect. Connect-and-View automatically sets up correct triggering by recognizing signal patterns. Without touching a button, users will get a stable, reliable and repeatable display of virtually any signal, including motor drive and control signals. The 190-202-III is especially fast and convenient for measuring a number of test points in rapid succession.

Built-in Multimeter

Built-in digital multimeter

Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter on two channel 190-202-III. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

ScopeRecord™ Mode

ScopeRecord™ mode for high resolution waveform recording

ScopeRecord memory stores up to 30,000 or more data points per channel, capturing fast intermittent events and glitches as short as 8 ns. (Two sets of multiple channel recordings can be stored to internal memory for later analysis.)

Records events like UPS, power supply or motor start-up cycles
With the Stop on Trigger mode, the ScopeMeter Test Tool automatically recognizes a power failure and stores the waveform data preceding it

Trend multiple measurements capturing signal intermittent events, signal drift or fluctuations

TrendPlot

TrendPlot paperless recorder records up to 11 days to help users find intermittent faults

The toughest faults to find are those that happen only once in a while. These intermittent events can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, dips, swells and interruptions, or the starting and stopping of a motor can also cause a machine to stop. A user may not be around when it happens, but the 190-202-III will be.

Plot minimum and maximum peak values and average over time
Plot any combination of up to four readings including voltages, amps, temperature, frequency and phase for all inputs, all with time and date stamp to pinpoint faults

FlukeView™ 2 ScopeMeter software for documenting, archiving and analysis

Get more out of the ScopeMeter Test Tool with FlukeView 2 ScopeMeter Software for Windows.

FlukeView™ 2 Software

Documentation: Transfer waveforms, screens and data to a PC for printing or importing data into a report
Add text to ScopeMeter Test Tool settings: Give operators guidance when recalling settings
Archive: Create a library of waveforms for easy reference, or waveform comparison
Analysis: Use cursors or export data to another analysis program

Included:

1 – 190-202-III 2-Channel Color ScopeMeter with DMM/External Input, 200 MHz
1 – BC190/830 Power Adapter
1 – Power Cord Set
1 – BP290 Li-ion Battery Pack
1 – TL175 Test Lead Set
2 – VPS410-II Probes
1 – Hanging Strap
1 – USB-Cable
1 – User Manual

Weight	1 kg

Specifications PDF

Specification Pdf

Reviews

There are no reviews yet.

CALL US TOLL FREE