An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also safety rated for CAT III 1000 V, CAT IV 600 V environments.
Fluke 80i-2010s/3PK Specifications
Electrical | |
Current Range | 2000 A AC rms, ± 2000 A DC |
Output Sensitivity | 1 mV/A |
Accuracy | ±0.8% of reading ±0.2% of range |
Bandwidth for Accuracy Specification | DC to 400 Hz |
Load Impedance | >1 MΩ and <10 pF |
Frequency Response (Small Signal) | DC to 20 kHz (-3 dB) |
Temperature Coefficient | 0.1 x specified accuracy for each degree C above 28°C or below 18°C |
Working Voltage | 1000 V AC RMS or DC |
General Specifications | |
Operating Temperature | 14 to 122°F (-10 to 50°C) |
Storage Temperature | -22 to 140°F (-30 to 60°C), with battery removed |
Operating Humidity | ≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C]) |
Altitude | Operating: 6561.68′ (2000 m) Storage: 39,370.1′ (12,000 m) |
Demagnetize Clamp | Open and close the clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less |
Power Supply | 2 x AA alkaline batteries, IEC LR6 |
Battery Life | 150 hours (typically) |
Low Battery Indicator | Yes |
Safety | IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V |
Ingress Protection | IEC 60529, IP40 |
Output to Zero | Auto adjustment with Zero button |
Output Cable | 60″ (1.5 m) shielded coaxial cable with BNC plug |
Maximum Conductor Size | 2.05″ (52 mm) |
Maximum Jaw Opening | 3.2″ (81.5 mm) |
Dimensions | 4.33 x 10.63 x 1.81″ (110 x 270 x 46 mm) |
Weight | 1.6 lbs (0.71 kg), including battery |
Be the first to review “Fluke 80i-2010s/3PK AC/DC Current Clamp, 2000 A, 3-pack”