Ordering information FLK-Ti32 9 Hz Industrial-Commercial Thermal Imager, 9 Hz FLK-Ti27 60 Hz Industrial-Commercial Thermal Imager, 60 Hz Included: Thermal imager with standard infrared lens; ac power supply and battery pack charger (including mains adapters); two, rugged lithium ion smart battery packs; SD memory card; multi-format USB memory card reader for downloading images into your computer; SmartView® software with free software upgrades for life; rugged, hard carrying case; soft transport bag; adjustable hand strap; printed users manual; warranty registration card. Op FLK-LENS/TELE1 Telephoto Infrared Lens TI-CAR-CHARGER Thermal Imager Vehicle Charger TI-VISOR Thermal Imager Visor BOOK-ITP Introduction to Thermography Principles Book TI-TRIPOD Tripod Mounting Base Accessory General specifications Operating temperature -10 °C to +50 °C (14 °F to 122 °F) Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries Relative humidity 10 % to 95 % non-condensing Display 9.1 cm (3.7 in) diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover Controls and adjustments User selectable temperature scale (°C/°F) Software SmartView® full analysis and reporting software included Batteries Two lithium ion rechargeable smart battery packs with five-segment LED display to show charge level Battery life Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD) Battery charge time 2.5 hours to full charge AC battery charging Two-bay ac battery charger (110 V ac to 220 V ac, 50/60 Hz) (included), or in-imager charging. AC mains adapters included. Optional 12 V automotive charging adapter. AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz). AC mains adapters included. Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of inactivity Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01 Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006 C Tick IEC/EN 61326-1 US FCC CFR 47, Part 15 Class B Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6 Shock 25 g, IEC 68-2-29 Drop 2 meter (6.5 feet) with standard lens Size (H x W x L) 27.7 cm x 12.2 cm x 17.0 cm (10.9 in x 4.8 in x 6.7 in) Weight (battery included) 1.05 kg (2.3 lb) Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from all directions) Warranty Two-years (standard), extended warranties are available. Recommended calibration cycle Two-years (assumes normal operation and normal aging) Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish |
Fluke Ti27Industrial Thermal Imager / Infrared Camera
- Temperature measurment range -20°C to +600°C (-4°F to +1112°F)
- Temperature measurement accuracy ± 2°C or 2% (at 25°C nominal, whichever is greater)
- Emissivity correction, reflected background temperature compensation, transmission correction
- Image capture frequency 60 HZ and 9 HZ models
- Detector type, Focal Plane Array, uncooled Microbolometer, 240 x 180 pixels
- Thermal sensitivity (NETD) ≤0.05° at 30° target temp. (50 mK)
- Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2) on imager
- Palettes 8 standard, 8 Ultra Contrast
- High-temperature alarm (user-selectable)
- Two lithium ion rechargeable smart batteries
- 4+ hours continuous use per battery pack
- 2 meter (6.5 ft.) drop test with standard lens
Fluke Ti29Industrial Thermal Imager / Infrared Camera
- Temperature measurment range -20°C to +600°C (-4°F to +1112°F)
- Temperature measurement accuracy ± 2°C or 2% (at 25°C nominal, whichever is greater)
- Emissivity correction, reflected background temperature compensation, transmission correction
- Image capture frequency 60 HZ and 9 HZ models
- Detector type, Focal Plane Array, uncooled Microbolometer, 280 x 210 pixels
- Thermal sensitivity (NETD) ≤0.05° at 30° target temp. (50 mK)
- Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2) on imager
- Palettes 8 standard, 8 Ultra Contrast
- High-temperature alarm (user-selectable)
- Two lithium ion rechargeable smart batteries
- 4+ hours continuous use per battery pack
- 2 meter (6.5 ft.) drop test with standard lens
Fluke Ti32 IndustrialThermal Imager / Infrared Camera
The Ti32 delivers the crisp, clear images with its 320 x 240 resolution detector.
An Industry leading 50mk (.05C) thermal sensitivity (NETD).
Automatic alignment of infrared and visual images with patented Fluke IR Fusion.
The most affordable optional wide angle and telephoto lenses on the market.
Interchangeable litheon ion batteries
- 600C temperature range
- 6.5 ft drop rating
- 2 year warranty
Be the first to review “Fluke Ti29 Industrial-Commercial Thermal Imager3”