mA & V Calibrator

PIE Model 532 High Accuracy mA & V Calibrator with Patented Current Leakage Test.
 Includes rubber boot, carrying case and FREE NIST Traceable Certificate of Calibration

Source and Read 0.000-24.000 mA Simulate 2-WireTransmitters

Power 2-Wire Transmitters and Read 0.000-24.000mA 
Display current in mA or -25.00-125.00 % of 4-20 mA

Read 0.00 to ± 30.00 VDC with 4X over rangeability Source 0.000 to 24.000 VDC 
with up to 20 mA output Direct Calibration1.000V to 5.000V

Bar graph for quick reference of input andoutput levels

High contrast graphic display viewable in alllighting conditions and angles

Displays loop current, voltage, resistance, ACvoltage and

mode of operation simultaneously eliminatingmultiple DMM

connections.

Make DYNAMIC loop readings under actualoperating conditions

Included in the loop diagnostic features is itsability to measure ground current leakage from faulty 
wiring, flooded conduit,and corrosion bridges. This leakage subtracts from the signal current sensed by 
the receiving system (ie: DCS), causing a measurement error.

EZ-Dial™Knob

Change the speed of dialing your test point byjust pushing down on the knob

Easily adjust output by 0.001 mA (0.01 %) or0.100 mA (1.00 %)

EZ-Check™Switch with EZ-Step™Button

3 position tactile switch with push button fortrue one handed calibrations

Push button for stepping through calibrationpoints

16 different step sizes

Selectable soak and step time for working withvalves

The Practical Instrument Electronics’ Model 532 is the best tool for calibration, test, and diagnosing process loops. 
The Model 532 brings all the features you would expect from a loop calibrator and timesaving new ones. 
Make adjustments with the EZ-Dial™ Knob or test limits with the dual action EZ-Check™ Switch. 
Powerful ramping functions are only a button away on the Model 532. Save potentially hours of troubleshooting 
time on problem loops with the 532’s unique Loop Diagnostic Mode. In Loop Diagnostic Mode, the loop current, 
voltage, resistances, AC voltage, and mode of operation are all displayed simultaneously; without the need of 
multiple DMM connections. Loop diagnostic is available in every mode of operation and truly is a diagnostic monitor, 
as parameters are continuously updated in real time. The smart diagnostic tool even indicates the most likely cause of loop failure!

The Model 532 can detect loop current, voltage, resistance,

AC voltage and HART®

protocol if present in the loop. You are able to connect the

532 to either side of the loop and in every operation mode

diagnose what is happening in the loop without the need of a

DMM. Just press the loop diagnostic button once

connected and see if there is a problem with the loop.

(Unless otherwise indicated all specifications are rated from a nominal 23 °C, 70 % RH for 1 year from calibration)
Operating Temperature Range -20 to 60 °C (-5 to 140 °F) Storage Temperature Range -30 to 60 °C (-22 to 140 °F)
Relative Humidity Range 10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing
10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing Size 7.00 X 3.30 X 2.21 inches (177.8 x 83.8 x 56.1mm) 
Weight 12.0 oz (340 grams)

Battery 9V AlkalineSource/Power and Measure 2-Wire Transmitter Specifications: