Megger DPM1000 Power Clamp Meter
The new Megger DPM1000 Power Clamp meter combines the functionality of power meter, harmonics meter and data logger in one easy to use package. The design meets the requirements of BSEN 61010-1 CAT IV 600V for supply side applications. A large backlit LCD clearly displays all measurements that turns on at the touch of a button or when rotating the selection dial. It also automatically switched off to save battery consumption.
The DPM1000 can measure DC, AC, pulsed and mixed currents up to 1000 A simply by clamping the jaws around the appropriate conductor, whilst voltages up to 1000 V AC or DC may be measured by the supplied test leads, Where power measurements are to be made both techniques above are performed simultaneously. All power related parameters including energy consumption, frequency, total harmonic distortion, distortion factor and capacitance. It features auto-ranging and has 3 phase rotation indication.
- AC/DC voltage and current measurment
- Harmonic measurment and distortion
- Power factor measurement
- Watt measurment to 1MW
- Compatible with Megger Link app
What’s included
- Megger DPM1000 power clamp meter
- Lead set
- Carry case
Megger DPM1000 Power Clamp Meter Technical Specifications
ACA Range | 100A – 1000A | |
Resolution | 0.01A | |
Basic Accuracy | ± (1.5% +5d) at 50-500Hz | |
Conversion Type | AC+DC True-RMS | |
ACV Range | 100V-1000V | |
Resolution | 0.01V | |
Basic Accuracy | ± (1.5%+5d) at 50Hz~500Hz | |
Input Impedance | 3.5MΩ | |
Overload Protection | 1000V rms | |
DCA Range | 100A – 1000A | |
Resolution | 0.01A | |
Basic Accuracy | ± (1.5% +5d) | |
DCV Range | 100V~1000V | |
Resolution | 0.01V | |
Basic Accuracy | ± (0.7%+2d) | |
Input Impedance | 3.5MΩ | |
Overload Protection | 1000V rms | |
AC+DCV Range | 100V~1000V | |
Resolution | 0.01V | |
Basic Accuracy | ± (1.7%+7d) | |
Input Impedance | 3.5MΩ | |
Overload Protection | 1000V rms | |
Watt | 10KW~1MW | |
Resolution | 1W | |
Power Factor | -1.00 ~ 1.00 | |
Resolution | 0.01 | |
Basic Accuracy | ± 5d | |
T.H.D | 0.1% ~100% | |
Resolution | 0.1% | |
Basic Accuracy | ± (3.0%+10d) | |
Harmonics | 0.1% ~100% | |
Resolution | 0.1% | |
Basic Accuracy | ± (5.0%+10d) For order 1-12 | |
± (10.0%+10d) For order 13-25 | ||
Resistance | 1kΩ – 100kΩ | |
Resolution | 0.01Ω | |
Basic Accuracy | ± (1.0% + 5dgt) | |
Overload Protection | 1000V rms | |
Continuity Beeper | <30Ω, 2.KHz tone buzzer | |
Diode Test | Open Circuit Voltage | ± 1.8 V max |
Capacitance | 4µF – 4000µF | |
Resolution | 1nF | |
Basic Accuracy | ± (1.9%+8d) | |
Overload Protection | 1000V rms | |
Frequency Counter | 20.00Hz ~ 10.00KHz | |
Resolution | 0.01Hz | |
Accuracy | ± 0.5%+3d | |
Temperature | -50°C ~1000°C | |
Resolution | 0.1°C | |
Accuracy | ± (1.0%+3°C) | |
Overload Protection | 1000V rms | |
Sampling Rate | 3times/sec | |
Overload Indication | “OL” or “-OL” | |
Low Battery Indication Auto Power Off | 15 Minutes | |
Operating Temperature | 0°C~50°C, ≦80% RH | |
Storage Temperature | – 10°C ~ 50°C | |
Temperature Coefficient | 0.2 x (Spec. Acc)/°C, <18°C or>28°C | |
International Standard | IEC/EN 61243-3:2014 | |
Safety Standard | IEC 61010-1, Designed to meet UL61010 Spec CAT IV 600V, CAT III 1000V | |
Maximum Conductor Size | 40mm | |
Maximum Busbar Size | 61 x 12mm | |
Power Requirement | AAA Size Battery 1.5V x 6 | |
Battery Life in hours | 50 | |
Size | 103mm(W) x 258mm (L) x 55mm(H) | |
Weight: (with battery) | 600g |
Be the first to review “Megger DPM1000 Power Clamp Meter”