Portable,Rugged, Push-Button Water Samplers
|On this page:|
The portable water sampleris ideal for removing samples from shallow wells and surface water sources,including lakes, ponds, and holding pools. The water sampler islightweight, rugged, easy to use, weather resistant, and requires minimalmaintenance. The water samplers are designed to take a manual sample andthey have the ability to backflush the sample hose once a sample has been taken.
The SP100 water sampler includes an internal 5AH 12V DC rechargable gel cellbattery that will power the water sampler to pump approximately 150 liters (40gallons) between rechargings. A battery charger is included with the unitand will recharge the battery within 12 hours.
To provide high sample integrity, the water sample never comes in contact withany water sampler components other than the norprene and polyethylene tubing. The tubing is easy to clean and replaced. To avoid cross-contamination orlengthy decontamination procedures, simply change the inexpensive tubing betweensamples.
Operating Temperature: 32° to +158°F (0° to +70°C)
Battery: Rechargeable 12 VDC, 5 AH Gel Cell
Battery Life: The battery will power the sampler for appoximately 2-1/2hours of continuous sampling.
Flow Rate: 1000 ml per minute at 4 ft. head
Maximum Lift: 22 ft (6.7 m)
Pump Tube: Norprene 1/4 inch ID
Sample Hose: 15 ft (4.6 m) nylon reinforced polyethylene tubingwith intake strainer.
Enclosure: Expanded UV protected PVC
Dimensions: 9×7.5×4.5 inch (23x19x11 cm)
Weight: 6 lb (2.7 kg) (Shipping Weight 7 lb (3.2 kg))