|5540 Metric and 5541 BSP Adapter Sets|
|P5531 Dirt/Moisture Trap|
Pressure range 0 to 500 psi (35 bar)
Dirt/moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected particle contamination or fluid inside the device under test will be prevented from entering the deadweight system, avoiding downtime for maintenance or repair. Designed for operation in the vertical position these traps are simple to dismantle and easy to clean.
Designed to mount directly on the deadweight tester and featuring an acrylic chamber for visibility of contaminates this unit utilizes the standard test port adapters for easy instrument connections.
|P5532 Dirt/Moisture Trap|
Pressure range 0 to 3,000 psi (210 bar)
This high pressure version is provided with an aluminum central chamber for safety and utilizes the standard test port adapters.
|P5543 Angle Adapter|
To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar).
|P5544 Two Gauge Stand|
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar).
|P5551 Pointer Remover/Punch|
This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge.