2540 High Performance Sensor
Metal Paddlewheel
The +GF+ SIGNET 2540 offers the added strength and corrosion resistance of stainless steel for applications with low velocity measurements. Unique internal circuitry eliminates the need for magnets in the process fluid, enabling lower flow measurement while maintaining the advantages of insertion sensor design. The 2540’s unique rotor/bearing design offers low flow measuring capability with increased reliability. For remote applications, the 2517 Brass High Performance Flow Sensor is available and will operate with the 5100 Battery Operated Flow Monitor.Features
- Rugged 316 stainless steel construction
- Flow rates as low as 0.3 ft/s
- Installs in a variety of pipe sizes
- No magnets in process fluid
- Removal without shutdown with Hot-Tap version
- Uses standard pipe connections
Applications
- HVAC
- Water & wastewater
- Industrial process
- Large pipe sizes
Compatibility
- 5100 Flow Monitor (2517 only)
- 8512 Flow Transmitter
- 5500 Flow Monitor
- 8540 Pump Pulser
- 5600 Batch Controller
- 9010 Flow Controller
Technical Data
2540
Output Signal: | Open collector, sinking |
Output Frequency: | 15 Hz per ft/s |
Operating Range: | 0.3 to 20 ft/s |
Pressure/Temperature: | With standard Vitonå¨ O-rings: 250 psi @ 180 degrees F With optional EPR O-rings: 250 psi @ 212 degrees F |
Power Requirements: | 5 to 24 VDC |
Pipe Size Range: | -1 and -2: 1.5 to 24 in., -3 and -4: 1.5 to 36 in. (consult distributor for applications above 24 in.) |
Repeatability: | +/-0.5% of full range |
Linearity: | +/-1% of full range |
Materials: | Body: 316 SS Sensor fitting: 316 SS O-rings: Vitonå¨ (EPR optional) Rotor: CD4MCu Rotor bearings: PEEK Cable type: Twisted pair with foil shield Cable Length: 25 ft. (1000 ft. max.) |
Quality Standards: | CE |
Be the first to review “SIGNET 2540 High PerformanceFlow Sensors 4”