Simple to use
Multi-hole interchangeable insert for accurate calibration
Solid block giving unrivalled temperature uniformity
Rapid heating rates
RS-232 comms for use with Techneworks Software
Rugged case with Carry handle
Very economically priced
The isothermal block assembly is machined from a special alloy giving excellent thermal conductivity which also resists high-temperature oxidation. This block is designed to optimize performance between sufficient mass for good stability and uniformity but a low enough mass to achieve rapid heating/cooling rates and stabilization periods.
The standard block has 4 immersion test holes accepting Ø8mm probes x 80 mm deep for use with a reference probe typically an R or S type thermocouple or an SPRT.
|Temperature range||150°C to 1200°C|
|Temperature Stability||±0.2°C ( at 1200°C after 20 mins)|
|Safety over-temperature cut-out||Yes|
|Display resolution||0.1°C to 999.9 then 1°C to 1200°C|
|Display units||Selectable °C or °F|
|Heating rate 100 to 1200°C||20 minutes|
|Cooling rate 1200 to 200°C||140 minutes|
|Large lnsert block||Ø34mm x 155 mm with 4 off bores Ø8mm x 80 mm deep|
|Fast Cooling||Rapid Air Cooling Probe – Option|
|Dimensions L x W x H (mm)||350 x 200 x 300|
Hard Carry case
UKAS calibration certificate
|FDB1200XS||Tecal 1200S 230v|
|FDB1200XP||Tecal 1200S 120v|
There are no reviews yet.