Minimum Required Order Value - $200 | We do not ship to residential address

Temperature range: -17° to 650°C (-1 to 1202°F), 12-month accuracy to ±0.4°C / 0.7°FAn economical solution for a timesaving and reliable true temperature calibrator. Ideal for on-site use. Save time with the automatic step function and the fully automat | OMNICONTROLS

Temperature range: -17° to 650°C (-1 to 1202°F), 12-month accuracy to ±0.4°C / 0.7°FAn economical solution for a timesaving and reliable true temperature calibrator. Ideal for on-site use. Save time with the automatic step function and the fully automat

$4929.62

JOFRA MTC Series – Marine Temperature Calibrator


Fast and convenient marine temperature calibrators

MTC – Marine Temperature Calibrator

The MTC series of portable temperature calibrators from JF INSTRUMENTS makes it very easy to maintain correct readings for all your temperature monitoring devices. The dry-block design does not use any hazardous hot liquid, has a larger temperature range and heats up and cools down much faster than a traditional liquid bath. TheåÊ MTC dry-block calibrators has been designed for much easier true temperature calibration in the field, leading to reliable results. The simple operation and the automatic functions have been carefully selected for ease of use. This has resulted in a fast, simple and efficient temperature calibrator without compromising quality. Reach 320°C (608°F) in just 4 minutes.

The MTC series features a large backlit display showing a lot of useful information at the same time: The set value and the true temperature, the status on the thermo switch test input, a count- down time before the temperature is stable and a big check mark when it is stable. To save time use the automatic switch test. The MTC series will find the open and close temperatures on a thermo switch and calculate the dead band. The MTC series also features an auto-step function. Using this function you may stay in the control room and monitor the temperature reading while the calibrator automatically steps through a number of pre-programmed temperatures located next to the sensor.

Models and temperature ranges
MTC-140 A: -17 to 140°C (-1 to 284°F)
MTC-320 A: 50 to 320°C (122 to 608°F)
MTC-650 A: 50 to 650°C (122 to 1202°F)

Features for MTC

  • Interchangeable inserts
  • Multi-hole insertion tubes
  • MVI Mains Variance Immunity
  • Automatic switch test
  • Multi information display
  • Safty banana bushings
  • Auto stepping
  • Stability indicator
  • Count down timer (shows when unit is stable)
  • Programmable maximum temperature
  • Fast simulation/training mode
  • Re-calibration from keyboard
  • RS232 and JOFRACAL calibration software
    åÊ

åÊ

Selection guide MTC Series

åÊMTC-140 A

MTC-320 A

MTC-650 A

Temperature range @ ambient 23°C / 73°F

-17åÊto 140°C (-1 to 284°F)33åÊto 320°C (91 to 608°F)33åÊto 650°C (91 to 1202°F)
Heating time15 min.4 min.10 min.
Immersion depth110 mm115 mm115 mm
Accuracy±0.5°Cåʱ0.5°C±0.9°C
Stability±0.05°C±0.1°C±0.1°C
Resolution0.1°C0.1°C0.1°C
Read-out°C and °F°C and °F°C and °F
NORMAL DELIVERY 1-2 week
Call us to get the exact delivery date.
International Credit cards are not accepted on online orders.

Add to Wishlist
Add to Wishlist
SKU: MTC650A115B010GCXX Category:
Brand:Ametek
Warranty: As per Manufacturer policy
100% Genuine Product
Brand Warranty
Easy and Secure Payment
Buyer Protection
Payment Options:
Credit Card, Debit Card
Buy More, Save More.
Timely delivery with complete tracking

‘We sell to B2B only, we do not ship to residential accounts. Enter your business address’

Loading...