Triplett LVPRO30SR Low Voltage Pro Multifunctional Cable & Network Tester with Smart Remotes, RJ45 & Coax ID Remotes, 10/100/1000 Detection

The Triplett LVPRO is an industry leading cable tester that runs a variety of cable testing procedures such as wiremap, timing tests (delay, skew), impedance measurement, Ethernet switch port blink, speaker pop, cable length, PoE volts, loaded battery test and 10/100/1000 indication, plus it gives you the ability to store and print up to 250 test reports. Three models to choose from. Model LVPRO20 has 7 test apps and is Web upgradeable to Model LVPRO30 which has 13 test apps. Model LVPRO30SR adds Smart Remotes to Model LVPRO30. The LVPRO comes complete with Detachable Remote, F Male to BNC Male, F Male to BNC Female, (2) RJ45 patch cables, RJ45 to alligator clip adapter, USB cable, (4) AA batteries and carrying case. Models 30 and 30SR also include: 10 RJ45 remotes, 10 Coax remotes, and 3 RLQ adapters. In addition, Model 30SR includes Smart Remotes.

Included Functions:

• Cable Testing: Cable diagram, Pass/Fail, timing (delay, skew), and impedance (ohms)
• Wall Jack ID: Locate multiple wall jacks for CAT5/6 and coax
• Speaker Popper: Locate speakers by audibly “popping” them
• SPKR 7.1 ID# Mapper: Map and label A/V speaker wires (requires remote kit, sold separately)
• Port Blink Cable Detection: Locate cable connection to switch port by blinking switch’s Link LED
• Tone Cable Detection: Place tone on one end and detect it on far end (requires Remote Tone Probe, sold separately
• Alert LEDs (Links, Volts): Two LEDs quickly alert you to an active switch connection or voltage on the line
• Length: Measures cable length, distance to open or short; suitable for all wire types (use built-in VOP values or calibrate with your cable)
• Return Loss Quality (RLQ): Tests for load mismatches that affect the wire’s power and data transfer capability
• 10/100/1000 Detection & Display: Plug into any active port (computer, switch, VoIP, access point) and display its capabilities
• PoE / Pairs: Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both)
• CCTV / Vpp (peak to peak voltage): Measure and display Vpp of video signal
• Phone: Display voltage and cable location (up to 4 phones); detect central office telephone connections
• Loaded Battery Test: Test alarm system and other backup batteries by doing a loaded battery test

Included:

• 1 – LVPRO Main Unit
• 1 – Detachable Remote
• 10 – RJ45 Remotes
• 10 – Coax Remotes
• 3 – RLQ Adapters
• 1 – F Male to BNC Male
• 1 – F Male to BNC Female
• 2 – RJ45 Patch Cables
• 1 – RJ45 to Alligator Clip Adapter
• 1 – USB Cable
• 4 – AA Batteries
• 1 – User Manual