The Global Water FM500 ultrasonic flow meters provide accurate and trouble free flow metering for a wide range full pipe applications including: potable water, raw wastewater, effluent, well water, slurries, or virtually any sound conducting liquid. The FM500 ultrasonic flow meter incorporates the latest ultrasonic technology to give you an accurate, easy to use hybrid flow meter with selectable Doppler or transit-time operating modes. With their quick and easy clamp-on transducer installation, factory pre-configuration and user programmable menu driven interface, the ultrasonic flow meters are a snap to commission in the field. The reliable FM500 ultrasonic flow meters use custom algorithms and DSP technology to ensure high accuracy flow metering, and the proprietary AGC (Automatic Gain Control) algorithm eliminates the need for manual gain adjustments.
Ultrasonic Flow Meter’s Great Features
Loaded with the features, the FM500 ultrasonic flow meters include: five programmable and password protected configurations for multiple user and portable applications, an easy to read 320 x 240 pixel backlit LCD display, data logging to standard SD Card format (user configurable to time interval, flow rate and total set-point triggers), isolated 4-20mA analog and 0-1000Hz pulse outputs.
Ultrasonic Flow Meter’s Optional Features
Optional features include: three configurable relay outputs and a communications package that allows the ultrasonic flow meter to connect to your computer via RS-232, RS-485, USB or Ethernet. The ultrasonic flow meter’s communication package also permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture and process control functions. The software included with the ultrasonic flow meter’s communication package allows remote internet access through a local network set-up.
Custom Configured Ultrasonic Flow Meters
The FM500 ultrasonic flow meters can be configured for your specific pipe and process liquid application so that it is ready to go out of the box. We will need the following information for configuration purposes:
Pipe size (ID), material and schedule (EG: 3 inch schedule 40 PVC)
Process liquid being measured (EG: raw wastewater)
Volumetric and time units to be displayed (EG: US gallons/minute)
Language displayed (EG: English)
How The Ultrasonic Flow Meters Work
The Global Water series Hybrid Ultrasonic Flow Meters can measure fluid flow in virtually any fluid in which sound waves can travel. The Ultrasonic Flow Meters are considered “hybrid” because they can measure fluid flow using either the Doppler or Transit Time methods. The Global Water ultrasonic flow meter’s sound transducers are clamped to the outside of the pipe wall and include no moving parts. This method of flow measurement is safe, non-intrusive and very easy to service.
The Ultrasonic Flow Meter’s Doppler measurement method requires particles be present in the flow stream to “reflect” the sound waves. The ultrasonic flow meter may not read flow correctly when using the Doppler mode if the fluid contains no particles. For best results 0.02% to 15% (200 to 150,00 ppm) particles should be present in the flow stream.
The Ultrasonic Flow Meter’s Transit Time measuring method requires relatively “clean” fluid to enable the sound waves to complete their circuit. The Ultrasonic Flow Meters may be operated in the Transit-Time mode when the fluid contains 0% to 10% (0 to 100,000 ppm) of particles. To allow for changes in the fluid’s particle count, the Global Water Ultrasonic Flow Meters monitor the signal gain and employ an Automatic Gain Control (AGC) algorithm that periodically adjusts the gain to maintain the optimum power level.