WA600WATER LEVEL ALARM SENSOR
High waterindicator and low level water controller
|On this page:||Downloads (PDF):|
Global Water’s Water LevelAlarm Sensor (WA600) is a solid state water sensor for detecting the presence ofconductive solutions, such as water spills, water tank levels, and drainageponds. The water alarm sensor features two stainless steel electrodes thatare positioned at a desired point for liquid detection. When fluid isdetected, a relay closes in the water level alarm and the signal can be used tosound an audible alarm or close a switch inside a piece of remote monitoringequipment. The relay output is fully isolated and can handle 2 amps ofcurrent.
After the water level alarm sensor is in dry conditions, the detection sensorwill automatically reset without requiring additional service. The waterlevel alarm is rugged and durable and requires minimal maintenance.
The Water Level Alarm has many uses, including: surface water monitoring,precision level detection, water level control, high water indication, andsubmersible marine low level indication. The water alarm sensor can bepurchased to trigger an alarm upon contact with water or air (please specifywhen ordering).
Electronics: Solid state, fully encapsulated in epoxy
Electrodes: 304 stainless steel
Cable: 4 wire shielded; 25 ft length (may be extended to 500 ft)
Input Voltage: 12VDC to 36VDC
Current Draw: Continuous 4mA, Active 44 mA
Alarm Output: Isolated relay
Contact Type: Switch closure
Switching Voltage: 100Vdc max
Switching Current: 250 mA max
Carry Current: 400 mA max
Dimensions: 1 inch dia. x 5 inches long (2.5 cm dia. x 13 cm long)
Weight: 6 oz (170 g)