Used to monitor and measure indoor and outdoor temperature. 3 Channel Wireless Thermometer Min / Max Memory Programmable Temperature Alert °C / °F Switch Includes: 1 RSAT Sensor
RANGE OF TEMPERATURE MEASUREMENT:
Indoor Unit: 32º to 122ºF (0º to 50ºC)
Remote Sensor: 14º to 158ºF (-20ºto 60ºC),
lowest: -58ºF (-50ºC) using extension cord
Transmission: Max. 100 ft (30M) openarea,
Resolution: 0.1 degree fortemperature
Battery Life: 1 year (alkaline batteriesrecommended)
In normal mode,press – button to select F and C.
Press the MAX/MINto view the maximum values
for 5 seconds, press again to view the minimum
memory. To clear the memory record, press CLEAR
while the respectivevalues displaying on screen.
Press ALERTto turn temperature alert on and off.
Hold ALERT3 seconds to enter the alert setting
mode. The remote channel and the Upper + Lower
pointers flash. (if more than 1 remote sensor is
registered, press Ch to select channel & press
ALERT to confirm)
The Upperpointer and temperature will flash, enter
the desired upper limit with the +, – buttons,
press ALERT to confirm and go to the lower limit
The Lowerpointer and temperature will flash,
enter the desired lower limit with +, – buttons,
press ALERT to confirm and exit.
Each settingcycle will allow setting one channel
for the temperature alarm, the unit allows to enter
temperature alert for outdoor sensor channel 1,2, 3.
When temperature hits the limit of the preset, the
Upper + Lower pointers and the temperature of
the respective channel will flash, Press any keys to
stop the alarm.
Low batteryindication is available for the home unit
itself and all of the 3 remote channels. Replace the
batteries and follow the setup procedure as
mentioned in this instruction manual.