695pHINDUSTRIAL pH TRANSMITTER
IndustrialpH Transmitters and pH probes
IndustrialpH Transmitters Product Description
The industrial pHtransmitter is a 2-wire 4-20 mA pH transmitter enclosed in a sealed NEMA-4enclosure. The industrial pH transmitter has an LCD screen powered by 11to 80 VDC. The pH transmitters span has selectable pH values from 1 to14 pH units via an internal dip switch. The industrial pH transmitter usesBNC connections for the pH transmitters pH probe and has tinned leads for a3-K Balco ATC temperature probe or simulation resistor (3K resistor included). NOTE: If you will be using the industrial pH transmitter to monitor liquid witha pH close to 7pH or if your water temperature is close to 77°F the 3-K BalcoATC temperature probe will not be needed.
Recording
Global Water’s GL500 pHRecorder adds recording capabilities to the industrial pH transmitters. The GL500 pH Recorder connects to the pH transmitter’s 4-20mA output to recorddata. In addition, Global Water offers the PC300pH Controller to use the industrial pH transmitter’s output to control pumps oralarms.
IndustrialpH Transmitters Specifications
Industrial pH Transmitter:
Range: 0 to 14.00 pH
Resolution: 0.01 pH
Accuracy: 0.02pH + 1 digit
Span: Any 1 to 14 pH unit, selectable with internal DIP switch
Temp compensation: Auto 32 to 212 °F (0 to 100.0 °C) or manual usingfixed resistor
Input impedance: >1012 ohms
Output: 4 to 20 mA
Operating temperature: -14 to 140 °F (-10 to 60 °C)
Connector: BNC
Power Source: 11 to 80 VDC
Dimensions: 4.92×2.95×3.94 inch (37.9×7.5×10.0 cm) (NEMA 4X case)
On this page: | Downloads* (PDF): | Additional Information: |
Be the first to review “695pH Industrial pH Transmitter”