Incubator, SI60, SI60D
Easy access to working chamber
Many applications:
– Plant propagation
– Humidity tests
– Simulation of tropical conditions
– Incubation of complete instruments
– Corrosion testing
Choice of analogue or digital control
Constructed from clear Acrylic¨ polymer to give total visibility of samples at all times. Designed for easy access with hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.
For analogue model SI60, setting the temperature is via a calibrated knob. For digital model SI60D, setting the temperature is more accurately achieved via the LCD display. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37¡C. Additionally there is a temperature safety cut-out set at 72¡C.
The incubator is supplied flat packed, for assembly at point of use. Assembly is simple and requires only a screwdriver.
Temperature range | Ambient +5¡C to 60¡C |
---|---|
Temperature fluctuation at 37¡C | ±0.1¡C |
Temperature variation between shelves | ±0.3¡C |
Nominal volume | 60 litres |
Internal dimensions (w x d x h) | 450 x 380 x 380mm |
External dimensions (w x d x h) | 600 x 390 x 390mm |
Net weight | 11.2kg |
Electrical supply | 230V, 50Hz, 350W |
Model | Description |
---|---|
SI60 | Incubator, total visibility, analogue |
SI60D | Incubator, total visibility, digital |
SI60/1 | Acrylic base plate |
SI60/2 | Plastic coated shelf/rack system with two shelves |
Be the first to review “Acrylic Incubator Digital”