The LM103 is a general-purpose AC current probe designed for Power analyzer, DMM and other measuring instruments with voltage input. It has an output of 1mV per Amp. The LM103 has integral 5 ft (1.5m) leads terminated by safety 4mm banana plugs.
AEMC’s compact AC Current Probes Model LM103 (voltage) are equipped with high performance magnetic material offering excellent linearity and improved performance. They are ideal current measurement tools for use with Multimeters, Data Loggers and Power Analyzers. They are designed to meet the most stringent demands in the electrical contracting industry. They also meet the latest IEC safety and performance standards. The probes allow meters to measure AC currents in low-power secondary or industrial applications. Their increased 0.63” (16mm) clamping diameter easily accommodates most conductors allowing AC current to be measured, recorded and/or displayed on recording or measurement instruments.
Specifications:
Maximum Conductor Size | .63″ (16mm) |
Current Range | 200Arms AC |
Measurement Range | 0.01 to 350A |
Output Signal | 1mV/A AC (200mV @ 200A) |
Transformation Ratio | 1000:1 |
Output | 5 ft (1.5m) lead with 4mm safety banana plug |
Accuracy 50/60Hz | 1.5% ± 0.02A |
Frequency Range | 48Hz to 10kHz |
Phase Shift at 50Hz | 3° max |
Load Impedance | ≥10KΩ |
Overload | 350A continuously up to 1kHz |
Dimensions (HxWxD) | 5.12 x 1.81 x 1.34” (130.4 x 46 x 34mm) |
Weight | 8.8 oz (250g) |
Operating Temperature | 14° to +122°F (-10° to +50°C) |
Storage Temperature | -40° to +176°F (-40° to +80°C) |
Operating Humidity | 85% RH |
Pollution Degree | 2 |
Ingress Protection (lP) | IP40 |
EMC | EN 61326-1 |
Safety Compliance | EN/IEC 61010-2-32, 600V CAT III |
APPLICATIONS:
- Measuring in breaker panels
- Industrial loads
- HVAC
- Residential and commercial sites
- Data logging/recording
- General AC current measurements
- Power measurement applications
Be the first to review “AEMC® NEW AC Current Measurement Probes (200A, 1mV/A) Models LM103”