Certified thickness standards are ideal for checking calibration and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. All standards described below are supplied with a certificate of calibration showing traceability to NIST/NPL. |
Calibration Standards |
Ideal for use in the calibration lab Used to verify the accuracy of a magnetic, eddy current or ultrasonic coating thickness gage over its complete thickness measuring range Standards with steel or aluminum substrates consist of four (4) standards mounted in a durable leatherette binder Plastic thickness standards consist of four (4) polystyrene standards supplied in a rugged acrylic storage box |
Check Standards |
Ideal for use in the field or on the factory floor Each set consists of three (3) test standards; one zero (uncoated) and two (2) epoxy coated at high and low thicknesses Available with either a ferrous substrate for use with magnetic type coating thickness gages, or a non-ferrous substrate for use with eddy current type gages Mounted in durable leatherette binder |
Calibration Standards and Check Standards are ideal for use with magnetic, eddy current and ultrasonic coating thickness gages. |
Select the Calibration or Check Standard that most closely matches the range of your gage. |
PosiTector | Ideal for | Approximate Thickness | Coating/ Substrate | Accuracy | ||||||
Plate 1 | Plate 2 | Plate 3 | Plate 4 | |||||||
C A L I B R A T I O N S T A N D A R D S | CAL – S1 | PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, SPFS PosiTest FM & F | 0 | 3 mils 75 um | 10 mils 250 um | 60 mils 1.5 mm | Epoxy on Steel (Ferrous) | ± 0.01 milåÊ ± 0.25 um | ||
CAL – S2 | PosiTector 6000 F0S, F45S, F90S PosiTest DFT Ferrous & Combo | 0 | 3 mils 75 um | 10 mils 250 um | 20 mils 500 um | |||||
CAL – S3 | PosiTest GM & G PosiPen A, B & C | 0 | 0.25 mils 6 um | 0.75 mils 20 um | 3 mils 75 um | |||||
CAL – A1 | PosiTector 6000 N ,NS, NRS, FN, FNS, FNRS | 0 | 3 mils 75 um | 10 mils 250 um | 60 mils 1.5 mm | Epoxy on Aluminum (Non-Ferrous) | ± 0.01 milåÊ ± 0.30 um | |||
CAL – A2 | PosiTector 6000 NAS , N0S, N45S, N90S PosiTest DFT Combo | 0 | 3 mils 75 um | 10 mils 250 um | 20 mils 500 um | |||||
CAL – A3 | PosiTector 100 B | 3 mils 75 um | 5 mils 125 um | 10 mils 250 um | 20 mils 500 um | |||||
CAL – A4 | PosiTector 200, 200 B | 2 mils 50 um | 5 mils 125 um | 10 mils 250 um | 20 mils 500 um | |||||
CAL – P1 | PosiTector 6000 FT, FTS, NTS, FNTS | 15mils 375 um | 80 mils 2 mm | 185 mils 4.5 mm | 250 mils 6.5 mm | Polystyrene Blocks | ± {0.1 mil + 0.05%åÊ of thickness) ±(2.5 um + 0.05% | |||
CAL – P2 | PosiTector 6000 FHS, NHS, EOC | 100mils 2.5 mm | 250 mils 6.5 mm | 500 mils 13 mm | 750 mils 19 mm | |||||
CAL – P3 | PosiTector 100 C | 15mils 325 mm | 60 mils 1.5 mm | 100 mils 2.5 mm | 185 mils 4.5 mm | |||||
CAL – P4 | PosiTector 100 D | 60mils 1.5 mm | 100 mils 2.5 mm | 185 mils 4.5 mm | 250 mils 6.5 mm | |||||
CAL – P5 | PosiTector 6000 FKS, NKS | 60 mils 1.5 mm | 100 mils 2.5 mm | 250 mils 6.5 mm | 580 mils 12 mm | |||||
CAL – P6 | PosiTector 200 C | 15 mils 375 um | 60 mils 1.5 mm | 100 mils 2.5 mm | 125 mils 3 mm | |||||
C H E C K | CHK – PF1 | PosiTector 6000 F, FS, FRS, FN, FNS, SPFS, F0S, F45S, F90S PosiTest FM & F, DFT Ferrous & Combo | 0 | 2 mils 50 um | 20 mils 500 um | — | Epoxy on Seel (Ferrous) | åÊ ± 0.01 milåÊ ± 0.25 um | ||
CHK – PN1 | PosiTector 6000 N ,NS, NRS, FN, FNS, FNRS, NAS, NOS, N45S, N90S PosiTest DFT Combo | 0 | 2 mils 50 um | 20 mils 500 um | — | Epoxy on Aluminum (Non-Ferrous) | åÊ ± 0.01 milåÊ ± 0.30 um |
All standards above are supplied with a certificate of calibration showing traceability to NIST/NPL |
Be the first to review “DeFelsko PosiTector Check Standards”