Features
Overview
The Data-Chart 2000 has 2, 4, 6 or 12 direct universal isolated inputs that are menu selectable for DC voltage, DC current and thermocouples. The intuitive Touchscreen control provides easy, fast set up and operation.
Display
Our brilliant 5.6″ (142mm) active matrix TFT color display is the largest in it’s class and with a special anti-glare coated Touchscreen the viewability is second to none. If you need a more economical solution, the DC2000 can also be ordered with a super bright blue monochromatic display.
Recording
Data is stored in non-volatile internal RAM and downloaded to removable media automatically on a preset basis or on demand. Standard removable storage is a 3.5″ 1.44Mb disk or, for large amounts of data, you can choose the PCMCIA card drive option which will store up to 200 Mb of Data!
Speed
A measurement rate of 8 samples per second for 1 channel makes the DC2000 ideal for recording process signals that change quickly such as pressure. Or, if you require information less frequently, you can select to record between 8 samples per second and ten minutes.
Communications
Communication options offer great flexibility in accessing data or controlling the DC2000. Data can be accessed and downloaded over standard phone line using the RS232C option and a modem. The RS485 MODBUS option will allow the DC2000 to be installed into an existing MODBUS network or you can connect up to thirty one recorders in series. The 10BaseT Ethernet port option allows direct connection to LAN’s or WAN’s and the standard TCP/IP protocol means that you can transfer data over the Internet
There are more than 20 display modes to choose from. This gives you unparalleled flexibility to view only the data you need to see in virtually any format. Grouping of channels maximizes efficiency
Input Signals | ||
DC Voltage: | Linear, Industrial square root, logarithmic ± 150mV, ± 1.25V, ± 2.5V | Accuracy: 0.06% |
± 12.5V and ± 25V | Accuracy: 0.1% | |
DC Current: | 4-20mA, 0 to 20mA and 0 to 50 mA. | Accuracy: 0.15% using external 50 ohm 0.1% shunt |
Dry Contact: | Open = 0, Closed = 1 | |
External: | Signals can be input via serial port (Modbus). |
Thermocouple Resolution: 0.1°C, Cold Junction Reference: 0.5°C (0 to 50°C) Thermocouple burnout detection. | |||||
Thermocouple Info. | DataChart® Specifications | ||||
Type | Accuracy | °C | Accuracy | °F | Accuracy |
J* | 0.1% | J -101 to 1200°C | ± 1.5°C | -150 to 2190°F | ± 3.0°F |
K** | 0.1% | K -101 to 1372°C | ± 1.5°C | -150 to 2500°F | ± 3.0°F |
T** | 0.2% | T -101 to 400°C | ± 1.5°C | -150 to 750°F | ± 3.0°F |
E** | 0.11% | E -101 to 1000°C | ± 1.5°C | -150 to 1832°F | ± 3.0°F |
R | 0.16% | R -50 to 1768°C | ± 3.0°C | -58 to 3200°F | ± 6.0°F |
S | 0.17% | S -50 to 1768°C | ± -3.0°C | -58 to 3200°F | ± 6.0°F |
B | 0.22% | B 0 to 1820°C | ± 4.0°C | 32 to 3300°F | ± 7.0°F |
C | 0.13% | C 0 to 2400°C | ± 3.0°C | 32 to 4350°F | ± 6.0°F |
N** | 0.10% | N -101 to 1300°C | ± 1.5°C | -150 to 2372°F | ± 3.0°F |
* (± 2.5°C -210 to -100°C) **(± 2.5°C -270 to -100°C) |
RTD’s : Base accuracy 0.2% or 0.5°C (1°F). Resolution 0.1°C 2 or 3 wire connection. Cable compensation to ± 50 Ohm Open and short circuit detection. | ||
10 ohm Cu | -70 to 170°C | -94 to 338 °F |
100 ohm Pt 385 | -220 to 850°C | -364 to 1560 °F |
100 ohm Pt 392 | -180 to 820°C | -292 to 1500 °F |
200 ohm Pt 385 | -220 to 400°C | -364 to 750 °F |
200 ohm Pt 392 | -180 to 400°C | -292 to 750 °F |
120 ohm Ni | -70 to 300°C | -94 to 570 °F |
1000 ohm NI | -60 to 209°C | -76 to 408 °F |
(DIN 43760) |
Input Resolution | 0.0015% of full scale, 16 bit unless otherwise stated |
Input Impedance | > 10 Meg on 150mV, 1.25V and 2.5V ranges, >100 K on 5, 12.5, 25 Volt ranges. |
Input Channels | 2, 4, 6 or 12 direct |
Max Input | 50 Vdc |
CMNR | >100db, 50/60 Hz |
Measurement Rate | Measures all direct input channels every 125 milliseconds (each channel 8 times/second independent of no. of channels). |
Math Functions | +, -, x, /, logarithms, totalization, powers, averages, timers, and custom equations. |
EMC Compliance | Meets or exceeds the requirements of EMC 89/336/EEC |
Recording Rates | Selectable from 8/sec. to 10 minutes | ||
Data Format | Proprietary binary format for data security. | ||
Data Storage | Data stored in non-volatile RAM and recorded automatically, or on demand, to on board removable media. Full media format and verify capability. | ||
Media | Measurements | Capacity | |
Removable | 3.5″ Disk | 700,000 | 1.44MB |
Compact Flash | 50 million | Up to 64 MB | |
Internal | 1 Mb RAM (Non-Volatile) or 2 Mb RAM (Non-Volatile) | ||
File Types | Data files, Alarm and Event files, Configuration files, Language files. Multiple files of different names on a single disk. |
Display Type Color CCFL backlit Active Matrix TFT Liquid Crystal Display (5.6 inch) with touchscreen control.
Resolution 320 x 240 pixels.
Display Type Mono CCFL backlit STN Liquid Crystal Display (5.0 inch) with touchscreen control.
Resolution 240 x 128 pixels.
Display Modes Graphics (Trending vertical or horizontal), Bar Graphs (vertical or horizontal), Digital Meters, Alphanumeric Alarm and Event Data or combinations on a split screen. Review trended data. Search by time, date or signal value.
Virtual Chart Speed Programmable from 0.5in/hr to 600in/hr or 10mm.hr to 15,000mm/hr. Chart speed is independent of storage rate.
Display Windows Time/Date, Graphics (Bars, Large Digital, Trends), Disk Status, Systems Status, Menu Button Bar, Unit Indentification,Alarms/Events.
FEATURES
Touch Screen Touch sensitive screen with Button Bar for simple programming and easy operation.
Math Package Algebraic equations (basic math, powers, roots, natural and base 10 logarithms, exponentiation), peak monitoring, differentials, true rolling averages, time averages, gated timing, conditionals (Boolean logic), totalization, logarithmic scaling. 12 Programmable constants.
Buffer Internal 128k buffer (RAM) enables real time browsing of historic chart data independent of recorded data. Equivalent browse capability is approximately 560 pen inches. This represents about 5½ days for 4 pens at 1 inch/hour.
File Browse Any data file on disk can be browsed. File directory allows selection of different file names.
Disk Full Alarm User can set disk full threshold. Disk errors and alarms can be routed to contact closure.
Trend direction User selectable Horizontal or Vertical chart trending. “Pen” pointers for easy trace identification.
Power Requirements 100 to 240Vac, 50/60Hz or 125 to 300Vdc, 35VA max. Optional 24Vdc +/-15%.
Power Fail Protection Programmed parameters stored in non-volatile memory. Clock battery backed. Data retention time without power >12 months.Chart and alarm browse buffers stored in non-volatile memory.
Safety UL (3111-1) cUL (IEC1010-1) CE low voltage directive 73/23/EEC. Complies with EN 61010-1.
Temperature 5°C to 40°C per UL3111-1/IEC1010-1 with disk drive. -10°C to 50°C with PCMCA drive or ZIPTM Drive.
Humidity 10% to 80% RH per UL3111-1/IEC1010-1.
Wash Down IP65 Front panel only.
Alarm Contacts 3 or 6 isolated Form C, 3 amp @ 250Vac or 26 Vdc.
Solid State Relays 3 or 6, 0.5 amp @ 30Vdc.
Remote Inputs 3 isolated inputs, user selectable as dry contact or 5 to 12 Vdc (mech. relay), 12 to 24 Vdc (SS relay) activated.. Inputs share a common. Configurable for chart control, alarm acknowledge/reset, event markers, totalizer reset or logic input.
Communications ESD protected RS232 with full hand shaking. Supports modem or isolated RS485 port. Protocol: MODBUS RTU, MODBUS ASCII or serial printer port. Ethernet: 10BaseT. Unit may be remotely configured.
Printer Port Parallel printer port (25 pin D shell connector).
Weight | 1 kg |
---|
Reviews
There are no reviews yet.
‘We sell to B2B only, we do not ship to residential accounts. Enter your business address’
Be the first to review “DataChart® DC-2000 Paperless Recorder”