Direct reading glass flowmeter

Specifications (PDF)

Use Series DR Glass Flowmeters to accurately measure flow rates of air or water with the convenience of a direct reading scale. Permanently fused ceramic scale has integral float guides for optimum float performance. Reflective plastic background and 1.5 X magnification lens reduces eye fatigue and allows for more accurate readings. Units include a safety blow-out back panel for additional protection. Flowmeters are shipped completely assembled and include standard panel mounting hardware for quick installation.

Service: Compatible gases or liquids.

Wetted Materials: Flowtube: Borosilicate glass; Float: 316 stainless steel (black glass as indicated); Float Stops: PTFE; End Fittings: Anodized Aluminum or 316 stainless steel; O-rings: Buna-N on aluminum models and Fluoroelastomer on stainless steel models.

Temperature Limits: 250°F (121°C).

Pressure Limits: 250 psig (17 bar).

Accuracy: ±5% FS @ 70°F (21.1°C) and 14.7 psia (1 atm absolute).

Repeatability: ±0.25% of scale reading.

Scales: Direct reading 65 mm or 150 mm scales for air or water.

Turn-down ratio: 10:1.

Connection: 1/8″ female NPT.

Mounting: Vertical.

Valve: 6-turn needle (standard on models with valve).

.

.