Fluke 190-104/AM/S Offers
Simplify electrical signal analysis and diagnose equipment failures in the field with this portable oscilloscope. It offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, this series of ScopeMeters® performs in harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications. This portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free.
Features
- Two electrically isolated inputs
- Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
- Dedicated 5000 Count digital multimeter in 2 Channel models
- Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
- ScopeRecord roll mode, capture waveform sample data for up to 48 hours
- TrendPlot, trend measurement readings for up to 22 days
- Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
- IP-51 rated for dust and drip proof to withstand harsh environments
- Isolated USB ports for memory devices and PC connectivity
- Li-Ion battery for extended operating timespan
- Easy-access battery door to make it easy to swap batteries
- A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock
- CAT III 1000 V / CAT IV 600 V safety rated
Applications
- Microelectronics
- Power electronics
Gain four times the diagnostic power plus CAT IV safety rating
This scope is double-insulated two -channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.
Three-dimensional testing for industrial systems
Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
- Circuit voltage/current overloading
- Signal timing measurements and synchronization issues
- Attenuation/input impedance mismatch
- Signal fluctuation/drift
Three-phase testing for diagnosing VSD, power inverters, and converters
- Test for harmonics, transients and loads at the three-phase power input
- Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
- Test PWM output for reflections and transients or voltage unbalance
Safely measure from mV to kV
Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.
Take on the harshest conditions with the only IP-51-rated Scope on the market
Rugged and shock-proof, all ScopeMeter® portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.
Built in multimeter to quickly and conveniently perform precise measurements
Built-in digital multimeter 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include VDC, VAC, VAC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
Work a Full Shift on a Single Charge
New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.
Capture and share waveforms easily with USB connectivity
Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument setups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.
See a stable display instantly with Connect-and-View™ triggering
Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.
Record up to 48 hours of high-resolution waveforms with ScopeRecord™
ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
- Stores events like motion profiles, UPS, power supply, and motor start-ups
- With the Stop-on-Trigger mode, this unit automatically recognizes a power failure and stores the waveform data preceding it
- With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles
Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults
Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function helps find those faults by:
- Plotting minimum and maximum peak values and average over time up to 22 days
- Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults
Fluke 190-104/AM/S Specifications
Vertical Deflection | |
Bandwidth | 100 MHz |
Number of Channels | 100 MHz: 4 channels |
Real-Time Sample Rate | 1.25 GS/s |
Inputs | 4 scope plus DMM input |
Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
Timebase Range | 5 ns to 2 min/div |
Input Sensitivity | 2 mV to 100 V/div |
Trigger Types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
Trigger Source | Any scope input channel, or external via DMM input |
Glitch Capture | 8 ns |
Scope Measurements | Cursor: 7 Automatic: 30 |
Maximum Record Length | ScopeRecord mode: 30,000 pts Scope mode: 10,000 pts per input |
Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
Waveform Compare | Waveform reference with automatic Pass/Fail testing |
DMM Specification | |
Meter Inputs (also used as External Trigger Input for the Oscilloscope Mode) | 4 mm banana inputs, fully isolated from scope inputs and from scope ground |
Maximum Resolution | 5000 counts |
Measurements | VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter) |
Memory | 2 Channel Screen + Setup: 30 Recording: 10 |
Display | 6″ (153 mm) full color LCD with fast update rate |
Environmental Specifications | |
Operating Temperature | Including batteries: 32 to 104°F (0 to 40°C) Excluding batteries: 32 to 122°F (0 to 50°C) |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Altitude | Up to 6666′ (2000 m) for CAT IV 600 V, CAT III 1000 V Up to 10,000′ (3000 m) for CAT III 600 V, CAT II 1000 V |
Mechanical and General Specifications | |
Li-Ion Battery | BP290 2400 mAh Li-ion battery up to 4 hours included standard |
Dimensions | 10.6 x 7.5 x 2.8″ (270 x 190 x 70 mm) |
Weight | 4.85 lbs (2.2 kg) |
Safety Specifications | |
Electrical Safety | 1,000 V CAT III/600 V CAT IV (EN61010-1) |
What’s included with the Fluke 190-104/AM/S
- ScopeMeter™ Oscilloscope
- Test Lead Set
- Handstrap
- Hangstrap
- FlukeView ScopeMeter® Demo Package
- USB Interface Cable
- Carrying Case
- Battery Charger/Mains Adapter
- Li-ion Battery
- Multi-Language User Manuals on CD-Rom
- Three-Years on Main instrument
- One-Year on Accessories
Videos
Be the first to review “Fluke 190-104/AM/S ScopeMeter® Oscilloscope with SCC-290 kit”