Standard features include Self-Tune, Fuzzy Logic, fully adjustable PID, Auto/Manual control with bumpless transfer and front panel activation key, percent output indication, peak and valley indication, loop break protection and indication. For process inputs, the display is fully programmable from -1999 to +9999 with selectable decimal point location. Most thermocouple and RTD inputs can show whole or tenth degree displays. The Series 2600 is available with single or dual setpoint outputs and can be programmed for on-off, PID or heat/cool or latching alarm. All outputs are isolated from the inputs. Outputs include 10 Amp relay and 0-20 mA DC (scalable).
Model Number | Description | |
---|---|---|
26130 | Temperature/process controller, one relay output, with alarm. | |
26150 | Temperature/process controller, one current output, with alarm. | |
26133 | Temperature/process controller, two relay outputs, with alarm. |
- -924 Remote Set Point 0 to 10 VDC
- -926 Remote Set Point 0 to 20 mA
- -928 Remote Set Point 0 to 10 K Ohms
- -934 Process Signal Output, Non-Isolated 0 to 20 mADC
- -936 Process Signal Output, Non-Isolated 0 to 10 VDC
- -992 RS-485 Serial Communications Love Link Protocol
- -993 RS-232 Serial Communications Love Link Protocol
- -995 RS-232 Serial Communications Modbus RTV Protocol
- -996 RS-485 Serial Communications Modbus RTV Protocol
- MN-1 – Mini-Node RS-485 to USB converter.
- LOVELINK III – LoveLinkIII software provided on CD ROM.
- A-600 – R/C snubber (recommended for inductive loads like a solenoid or contactor).
- A-900 – Weatherproof enclosure, type 4X, control direct panel mounts in the front of the enclosure.
- A-901 – Weatherproof enclosure, type 4X, clear plastic window with rear panel for mounting the control inside the enclosure.
Be the first to review “Temperature/process controller, one relay output, with alarm.”