Amprobe’s newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The Signal Clamp can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you’re a novice user or an expert, the AT-6000 Amprobe Advanced Wire Tracer kit will help you get the job done fast.
Fetaures
- Traces wires in walls, ceilings, floors and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 2.5″” TFT LCD black & white display
- Simple one button Transmitter operation
- Two Transmitter signal modes
- “High Signal” mode for normal circuits
- “Loop” mode for closed loop de-energized circuits
- Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
- Comes with custom Amprobe soft carrying case, test leads and accessories
- Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline
- Compatible with optional Signal Clamp (CT-400) clamp-on attachment
Specification
Features | AT-6010-R Receiver | AT-6010-T Transmitter |
Measurement category | CAT III 600 V | |
Operating voltage/current | 0 to 600 V | |
Operating frequency | Energized: 6.25 kHz | |
Hazardous voltage detection | N/A | > 30 V AC/DC |
Signal indications | Numeric bar graph display and audible beep | LEDs |
Response time | Tip Sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
Current output of signal (typical) | N/A | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal voltage output (nominal) | N/A | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p With CT-400: Loop model: 31 V RMS, 120 Vp-p |
Range detection (open air) | Tip Sensor (Energized): Max distance via air: up to 20 ft (6.1 m) Pinpointing: approx. 1.97 in (5 cm) Tip Sensor (De-energized): Max distance via air: up to 14.7 ft (4.5 m) Pinpointing: approx. 1.97 in (5 cm) | N/A |
Display size | LCD 2.5 in (6.35 cm) | N/A |
Display dimensions (W x H) | 1.45 x 1.93 in (36.72 x 48.96 mm) | N/A |
Display type | Segment LCD | LEDs |
Display color | Black and white | Operating mode LEDs: red Battery status LED: red |
Booting time | < 3 sec | < 2 sec |
Backlight | Yes | N/A |
Operating temperature | -4 °F to 122 °F (-20 °C to 50 °C) | |
Operating humidity | 45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) | |
Storage temperature and humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH | |
Operating altitude | 0 to 6561 ft (2000 m) | |
Transient protection | N/A | 6.00 kV (1.2/50μS surge) |
Pollution degree | 2 | |
IP rating | IP 52 | IP 40 |
Drop test | 3.28 ft (1 m) | |
Power supply | 4 x AA (alkaline) | 8 x AA (alkaline) |
Power consumption (typical) | 70 mA | Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA |
Battery life | Approx. 25 h | Hi mode: approx. 25 h Loop mode: approx. 18 h |
Low battery indication | Yes | |
Fuse | N/A | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
Dimensions (L x W x H) | Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm) | Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm) |
Weight | Approx. 0.6 lb (0.27 kg) | Approx. 1.25 lb (0.57 kg) |
Certifications |
Refer to user manual for accessory specifications
Kit Contains | AT-6010 |
AT-6010-R Receiver | • |
AT-6010-T Transmitter | • |
TL-6000-INTL Test lead and accessory kit* | • |
CC-6010 Soft carrying case | • |
User Manual | • |
Quick Reference Guide | • |
1.5 V AA (IEC LR6) Battery | 12 |
* TL-6000-INTL test lead and accessory kit includes:
- 2 x 1 m test leads (red, black)
- 1 x 7 m test lead (green)
- 2 x Alligator clips (red, black)
- 2 x Outlet blade adapter (red, black)
- 2 x Outlet round adapter (red, black)
Be the first to review “Amprobe AT-6010 Advanced Wire Tracer Kit”