• Shopping Cart:
  • 0 Items In Cart
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117

sales@omnicontrols.com

 


Ultrasonic Hardness Tester w/ output

 




Price starts at $5,395.00

Product Code : MET-U1A50

Add To Cart Email Friend Add To Saved Cart
Ultrasonic Portable Hardness Tester
MET-U1A & MET-U1A50
 

IP66 Waterproof and Dustproof!

Non-Destructive Hardness Testing!

The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections.

PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument.

The MET-U1A/U1A50 meets ASTM A1038-10 specifications.
   

UCI Portable Hardness Testing Method: 
Model No’s. MET-U1A and MET-U1A50

Ultrasonic Contact Impedance is a hardness testing method based on the measurement of the frequency shift of a resonating rod caused by the essentially elastic nature of the finite area of contact between the indenter and the test piece during the penetration. Described as a hardness testing practice using a calibrated instrument by pressing a resonating rod with a Vickers style Diamond indentor with a fixed force against the surface of the part to be tested.
 
 

Pre-Programmed Scales/Material: Others combinations can be added upon request

Scales

Material

Measurement Range

Rockwell C

Steel

20-67 HRC

Rockwell B

Aluminum

59-99 HRB

Brinell

Steel

75-650 HB

Vickers

Steel

75-1000 HV

 

MET-U1A & MET-U1A50  Hardness Tester

Standard Accessories:

  • Base Instrument
  • 15N (1.5kgf) Hand-Held Probe (MET-U1A)
  • 50N (5kgf) Hand-Held Probe (MET-U1A50)
  • Calibrated Test Blocks (2pc)
  • Custom Carry Case                                                      
  • Battery Charger
  • Operation Manual

Functions:

  • Easy To Read Menu Operation
  • Large LCD Display w/ Back Light
  • USB Interface
  • Automatic Reading to All scales including  Brinell, Rockwell, Superficial Rockwell & Vickers      
  • Automatic Mean Value
  • Data Archive Capacity 

Specifications:

  • Tolerance +/- 3.0% deviation of average from the reference value of the test block with a minimum of 5 tests
  • Minimum Thickness of sample(MET-U1A) .040”  (1mm)
  • Materials: steel & cast steel, alloy tool steel, stainless steel,  aluminum, brass, bronze, wrought copper alloy.
  • Battery type: 4-AA  NiMH Re-Chargeable
  • Operating  temperature: 5-104 degrees F
  • Dimensions: 180 x 80 x 43mm (HxWxD)
  • Weight: 720g (1.10lbs)  w/probe

Options:

 

Technical data for MET U1A/U1A50

UCI Probe

 

Length

160mm

Diameter

25mm

Indentation Depth

30µm

Pressure Force(MET-U1A)

1.5kgf

Pressure Force(MET-U1A50)

5kgf

Transducer Test Life (approx)

200,000

Min. Thickness for test

1mm

Min. Radius for Test

5mm

Max Roughness of surface (MET-U1A)

Ra 2.5µm

Max Roughness of surface (MET-U1A50)

Ra 4.5µm

Max Archive

100 Tests

Time of Test

1.5 seconds


Shown with Optional Support Stand
trasonic Hardness Tester w/ output
script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">