Rugged, Push-Button Water Samplers
- Easy push-button control for exact sample size
- One liter per minute rate at 4-foot head
- Internal rechargeable battery
- Pump approximately 150 liters (40 gallons) between rechargings
- Weather resistant enclosure
- 15' pickup hose with strainer
Sampler Product Description
The portable water sampler
is ideal for removing samples from shallow wells and surface water sources,
including lakes, ponds, and holding pools. The water sampler is
lightweight, rugged, easy to use, weather resistant, and requires minimal
maintenance. The water samplers are designed to take a manual sample and
they have the ability to backflush the sample hose once a sample has been taken.
The SP100 water sampler includes an internal 5AH 12V DC rechargable gel cell
battery that will power the water sampler to pump approximately 150 liters (40
gallons) between rechargings. A battery charger is included with the unit
and will recharge the battery within 12 hours.
To provide high sample integrity, the water sample never comes in contact with
any water sampler components other than the norprene and polyethylene tubing.
The tubing is easy to clean and replaced. To avoid cross-contamination or
lengthy decontamination procedures, simply change the inexpensive tubing between
Operating Temperature: 32° to +158°F (0° to +70°C)
Battery: Rechargeable 12 VDC, 5 AH Gel Cell
Battery Life: The battery will power the sampler for appoximately 2-1/2
hours of continuous sampling.
Flow Rate: 1000 ml per minute at 4 ft. head
Maximum Lift: 22 ft (6.7 m)
Pump Tube: Norprene 1/4 inch ID
Sample Hose: 15 ft (4.6 m) nylon reinforced polyethylene tubing
with intake strainer.
Enclosure: Expanded UV protected PVC
Dimensions: 9x7.5x4.5 inch (23x19x11 cm)
Weight: 6 lb (2.7 kg) (Shipping Weight 7 lb (3.2 kg))