• Shopping Cart:
  • 0 Items In Cart
  • Total: $0.00
call today

TOLL FREE 1.800.783.6664

Voice: 813.971.5001 Fax : 813.971.5117

sales@omnicontrols.com

 


331 Universal Input Signal Conditioner and PID Controller

 




Price starts at $205.00

Product Code : dt331

Manufacturer : Datatrack

Model:
Logic module:
Power:
Analog Output:
Certificates:

Add To Cart Email Friend Add To Saved Cart

Download or View this product's / series details and specifications Specifications (PDF)

Primarily designed for multi-loop applications where single loop integrity is important, the T330 series are fully featured PID controllers with auto-tune, heat and heat/cool outputs with separate gains for water or air-cooling. Control outputs available are SSR Drive, relay, 0-10V or 4-20mA signals.

The Tracker 330 series allow direct connection to Thermocouples and RTD sensors as well as process signals (e.g. 4-20mA) and is fitted with a Modbus RTU compatible isolated RS485 Interface as standard. The instrument can trigger an alarm should there be interruption to the communications plus a partial load failure alarm for electrical heater faults. A thermocouple ageing warning, to predict near future failure, is also a standard feature.

10 and 24VDC sensor / loop excitation supplies are fitted on some models and alarm relays or TTL outputs are available as options. The modules can be supplied as 110 / 230VAC or 24VDC/ VAC powered. Configuration is via the front panel USB Port or the RS485 interface. Both ports can be used simultaneously. The configuration software is free and is available in the download section on this website.

331 UNIVERSAL INPUT SIGNAL CONDITIONER AND PID CONTROLLER

Example Ordering Code:

Model Number Analogue Output Power 2nd Relay Option Logic Module Option

(Tracker 331 PID controller with isolated analogue output and 2nd relay fitted, 24V DC/AC powered)

Code

Description

Model number

331

 

Universal input 14 x T/C, 7 x RTD, mA, mV, V

Isolated RS485 - Modbus RTU Compatible

● Communications Loss Alarm

Advanced PID control with auto-tune

1 x N/O relay output and 1 x TTL/SSR logic drive

● Thermocouple condition monitoring

Partial load failure and load monitoring function

18 point user linearisation, max/min, tare and square root functions

USB Configuration (Requires a 5-Pin Mini-B USB Cable - not supplied)

● Includes Windows Configuration Software

● TS 35 DIN rail mounting, unit 22.5mm wide

Analog Output

N A

Not fitted 0/4-20mA, 0-10V analogue output

Power Supply

1 2

90–265V AC mains power input 24V AC or DC low voltage input

2nd Relay Option

N

R

1 x relay with N/O contacts, 1 x SSR output

2 x relay with normally open contacts (replaces SSR output)

Logic module

(1 per 331)

341 342 343

4 x change over relay contacts and 2 logic inputs 3 x change over relay, 1 x TTL O/P + 2 logic inputs 4 x TTL Outputs and 2 logic inputs

COC

Certificate of Conformity

CC

Calibration Certificate

Model number

332

 

● Universal input 7 x T/C, 2 x RTD, mA, mV, V

Isolated RS 485 - Modbus RTU Compatible

● Communications Loss Alarm

Advanced PID control with auto-tune*

● 10V and 24V sensor excitation

Universal Mains Power supply 90-265VAC

● Thermocouple condition monitoring

Partial load failure and load monitoring function

18 point user linearisation, max/min, tare and square root functions

USB Configuration (Requires a 5-Pin Mini-B USB Cable - not supplied)

● Includes Windows Configuration Software

TS 35 DIN rail mounting, unit 22.5mm wide

Analog Output

N A

Not fitted 0/4-20mA, 0-10V analogue output

Power Supply

1 2

90–265V AC mains power input 24V AC or DC low voltage input

2nd Relay Option

N

R

1 x relay with N/O contacts, 1 x SSR output

2 x relay with normally open contacts (replaces SSR output)

Logic module

(1 per 331)

341 342 343

4 x change over relay contacts and 2 logic inputs 3 x change over relay, 1 x TTL O/P + 2 logic inputs 4 x TTL Outputs and 2 logic inputs

COC

Certificate of Conformity

CC

Calibration Certificate

 Recommended Items:
Page: 1 of 1 
$180.00
1
 
script async src="http://tp.multiview.com/dpx.js?cid=10024&action=100&segment=omnicontrols&m=1">