Ametek

  • Reference Temperature Calibrator, Basic model, Set of 3 Imperial multi hole inserts. Covering holes from 1/8” to 1/2”, Cert

    SKU: RTC700A115BSIXXXXXXFXXCT
    Manufacturer:Ametek
    0 out of 5

    Download or View this product's / series details and specificationsSpecifications(PDF)

    JOFRA RTC-Series – Reference Temperature Calibrator


    AMETEK continues to develop new techniques to improve performance, accuracy, convenience and functionality of the well-known JOFRA calibration products. By doing so, we maintain our position as one of the leading worldwide manufacturers of temperature dry-block calibrators.

     

    We are proud to introduce our new top model RTC series (Reference Temperature Calibrator) with RTC-156, RTC-157, and RTC-700, which all are no exception to the above and even more sophisticated than any existing calibrator on the market.

     

    The new RTC series comes in three different models – A, B, and C

    – RTC-A reference temperature calibrator

    – RTC-B reference temperature calibrator with input for reference sensor, DLC sensor and sensor-under-test

    – RTC-C reference temperature calibrator with input for reference sensor and DLC sensor

    • Model A, B and C:

    • • RTC dry-block calibrator (user specified)

    • • Mains power cable (user specified)

    • • Traceable certificate – temperature performance

    • • Tool for insertion tubes

    • • Heat shield

    • • JOFRACAL

    • • USB cable

    • • Manual

    • Model B instruments contain the following extra items:

    • • Test cables (2 x red, 2 x black)

    • • Traceable certificate – input performance for reference

    • sensor and DLC sensor

    • • Traceable certificate – input performance for sensorunder-

    • test inputs (RTD, mA, mV, TC)

    • Model C instruments contain the following extra items:

    • • Traceable certificate – input performance for reference

    • sensor and DLC sensor

    $14,299.32
  • Service Seal Kit

    SKU: T-747
    Manufacturer:Ametek
    0 out of 5

    Service Seal Kit

    $44.12
  • Service Seat Kit

    SKU: Ametek -75P013
    Manufacturer:Ametek
    0 out of 5

    Service Seat Kit

    $126.86
  • Sticker/Body Plate, SS

    SKU: T-595
    Manufacturer:Ametek
    0 out of 5

    Sticker/Body Plate, SS

    $12.41
  • System D&E Fitting Kit

    SKU: SPK-HPC-004
    Manufacturer:Ametek
    0 out of 5

    Banjo House Fitting Kit for System D&E

    $67.57
  • Temperature range: -17° to 650°C (-1 to 1202°F), 12-month accuracy to ±0.4°C / 0.7°FAn economical solution for a timesaving and reliable true temperature calibrator. Ideal for on-site use. Save time with the automatic step function and the fully automat

    SKU: MTC650A115B010GCXX
    Manufacturer:Ametek
    0 out of 5

    JOFRA MTC Series – Marine Temperature Calibrator


    Fast and convenient marine temperature calibrators

    MTC – Marine Temperature Calibrator

    The MTC series of portable temperature calibrators from JF INSTRUMENTS makes it very easy to maintain correct readings for all your temperature monitoring devices. The dry-block design does not use any hazardous hot liquid, has a larger temperature range and heats up and cools down much faster than a traditional liquid bath. The  MTC dry-block calibrators has been designed for much easier true temperature calibration in the field, leading to reliable results. The simple operation and the automatic functions have been carefully selected for ease of use. This has resulted in a fast, simple and efficient temperature calibrator without compromising quality. Reach 320°C (608°F) in just 4 minutes.

    The MTC series features a large backlit display showing a lot of useful information at the same time: The set value and the true temperature, the status on the thermo switch test input, a count- down time before the temperature is stable and a big check mark when it is stable. To save time use the automatic switch test. The MTC series will find the open and close temperatures on a thermo switch and calculate the dead band. The MTC series also features an auto-step function. Using this function you may stay in the control room and monitor the temperature reading while the calibrator automatically steps through a number of pre-programmed temperatures located next to the sensor.

    Models and temperature ranges
    MTC-140 A: -17 to 140°C (-1 to 284°F)
    MTC-320 A: 50 to 320°C (122 to 608°F)
    MTC-650 A: 50 to 650°C (122 to 1202°F)

    Features for MTC

    • Interchangeable inserts
    • Multi-hole insertion tubes
    • MVI Mains Variance Immunity
    • Automatic switch test
    • Multi information display
    • Safty banana bushings
    • Auto stepping
    • Stability indicator
    • Count down timer (shows when unit is stable)
    • Programmable maximum temperature
    • Fast simulation/training mode
    • Re-calibration from keyboard
    • RS232 and JOFRACAL calibration software
       

     

    Selection guide MTC Series

     MTC-140 A

    MTC-320 A

    MTC-650 A

    Temperature range @ ambient 23°C / 73°F

    -17 to 140°C (-1 to 284°F) 33 to 320°C (91 to 608°F) 33 to 650°C (91 to 1202°F)
    Heating time 15 min. 4 min. 10 min.
    Immersion depth 110 mm 115 mm 115 mm
    Accuracy ±0.5°C  ±0.5°C ±0.9°C
    Stability ±0.05°C ±0.1°C ±0.1°C
    Resolution 0.1°C 0.1°C 0.1°C
    Read-out °C and °F °C and °F °C and °F
    $4,929.62
  • Test Gauge

    SKU: T-213-1
    Manufacturer:Ametek
    0 out of 5

    Type T Test Gauge, 0-30 PSI

    $914.22
  • Type T Deadweight Tester

    SKU: Ametek -T-20
    Manufacturer:Ametek
    0 out of 5

    Type T Deadweight Tester, 20-2000 PSI

    $7,930.12
  • Valve Rod for Type T Deadweight Tester

    SKU: Ametek -T-115
    Manufacturer:Ametek
    0 out of 5

    Valve Rod for Type T Deadweight Tester

    $41.37
  • Weight Set

    SKU: RWS-.1KPA
    Manufacturer:Ametek
    0 out of 5

    Aluminum Weight Set

    $1,964.95
  • Weight Set for RK

    SKU: RWS-.1
    Manufacturer:Ametek
    0 out of 5

    Aluminum Weight Set for RK Pneumatic Deadweight Tester

    $1,933.24
  • Weight set for RK Deadweight Tester

    SKU: RWS-1CM
    Manufacturer:Ametek
    0 out of 5

    Aluminum weight set for RK Deadweight Tester

    $1,685.03